3. Setting and Storing Personal Data
For the measurement of body fat percentage, visceral fat level and skeletal muscle percentage, it is necessary to set your personal data (age, gender, height).
1.Turn on the power.
“CAL” blinks on the display, then the display changes to “0.0 kg”.
* Wait until “0.0 kg” is displayed.
2.Press the USER
button to select your personal profile number.
1)The selected
number blinks on the display.
2)Press the SET/
MODE button to confirm.
Then the default age setting blinks on the display.
3.[TO SET THE AGE]
Setting range: 10 to 80 years old
1) Press the or 
button to
adjust the age.
2)Press the SET/
MODE button to confirm.
Then the gender icons blink on the display.
4.[TO SET THE GENDER AND HEIGHT]
Set the gender 
(MALE) or 
(FEMALE) and height in the same way.
After all the settings are displayed for your confirmation, “0.0 kg” appears on the display.
This completes the setting.
Selecting Measurement Unit
You can change the measurement units used for the height and weight settings.
1.Turn on the power.
“CAL” blinks on the display, then the display changes to “0.0 kg”.
Wait until “0.0 kg” appears on the display.
2.Keep the 
button pressed until “lb” and “kg” blink on the display.
3.Press the 
button to select “kg” or “lb”.
This will also automatically change “cm” and “in”.
4.Press the SET/MODE button to confirm.
All height and weight measurements are displayed using the new measurement units. The change remains in effect until you change it again.
EN
5