Fluid Loss |
LM Time Above TZ |
● Press " EL" to activate the NiteLite. |
● Press & hold " " to turn On /Off TZ |
LM Time Below TZ
AVG HR
LM | Time Below TZ |
| AVG HR |
LM | Max HR |
| Calorie |
Alarm. |
● Press "LAP" to start a new Lap. |
● Press "NXT" to enter next item. |
● Press "STOP" to stop the Stopwatch |
LM | Max HR |
| Calorie |
Time & AVG HR of Lap-50
……
● Press "EL" to activate the NiteLite |
● Press & hold " " to turn On / Off TZ |
Alarm. |
● Press "STR" to start Lap Training |
and enter Lap Time. |
● Press "NXT" to enter next item. |
● Press "EXIT" to advance to Store |
Note : " LM "represents information that can only be viewed in Long Menu. You
can set Long or Short Menu in HR Setup. In Long Menu, you can see
more information about your exercise event.
After pressing “LAP”
Starting a new Lap
The screen will freeze for 2 seconds, then go back to the last screen.
When the stopwatch is stopped, you can view the following information:
Time & AVG HR of Lap-1
Data. |
Note 1 : For more Information about Fitness Index, please refer to the Fitness Index in Free Training.
Note 2 : You can view the time and average HR of all the laps.
Note 3 : " LM " represents information that can only be viewed in Long Menu. You can set Long or Short Menu in HR Setup. In Long Menu, you
can see more information about your exercise event.
Fitness Index
Total time
Time in TZ
Fluid Loss
LM Time Above TZ
●Press "EL" to activate the NiteLite .
●Press & hold "
" to turn On / Off TZ
Alarm.
●Press "STR" to start Lap Training and enter Lap Time.
●Press "NXT" to enter next item.
●Press "EXIT" to advance to Store
Data.
Store Data
●Press " EL" to activate the NiteLite.
●Press "
" to store data and exit to Lap Training Mode.
●Press "EXIT " if you do not wish to store data and exit to Lap Training Mode.
15 16