Acumen Hydra-Alert HRM manual Overview, Clock Mode, Fluid Loss Mode, TEM/HUM Mode

Overview

The Normal Modes in Hydra-AlertTMHRM can be toggled in the following

sequence by pressing “MODE”.

	Press “MODE”	Press “MODE”
Clock Mode		Set Mode	Exercise File Mode
Press “MODE”			Press “MODE”
Fluid Loss Mode			Lap Training Mode
Press “MODE”			Press “MODE”
TMP/HUM Mode			Free Training Mode
Press “MODE”			Press “MODE”
	Press “MODE”		Press “MODE”
Heat Index Mode	Stopwatch Mode		Interval Timer Mode
Summary of Icons
Heart Rate	Interval Timer	TZ Alarm	Daily Alarm
Current HR	Current HR	Turn On / Off Daily Alarm, TZ Alarm &
Above TZ	Below TZ	Interval Timer

2.1 Clock Mode

Without HR	Press "EL" to activate
	the NiteLite
	Press & Hold" " to Turn
	On / Off the Daily Alarm
	Press "MODE" to Advance
	to Fluid Loss Mode

With HR

Note: The icon that needs to be pressed & held will blink slowly.

2.2 Fluid Loss Mode

● Press "EL" to activate

the NiteLite.

● Press "MODE" to advance

Summary of Beeps

Button

SYNC Setup

Daily Alarm

Interval Timer

TZ Alarm

TZ Goal Timer

Produces a short beep

If SYNC fails, produces a 3-second beep

Produces 1-minute of double short beep until a button is pressed to stop it

Produces 4 double short beeps at the completion of each Interval Produces 4 triple short beeps at the completion of each Cycle Produces a 3-second beep at the completion of the Final Interval

Beeps constantly until HR is back to TZ

Produces a 3 - second beep when the TZ Goal Time is reached

to TEM/HUM Mode.

2.3 TEM/HUM Mode

● Press "EL" to activate the NiteLite.

● Press " MODE " to advance to Heat Index Mode.

78