ASSEMBLY
To hire an authorized service technician to assemble the exercise cycle, call
Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included hex keys, assembly requires an adjustable wrench 
and a phillips
screwdriver 
.
PART CHART
Use the drawings below to identify the small parts used in assembly. The number in parentheses below
each drawing is the key number of the part, from the PART LIST on page 18. The number following the paren- theses is the quantity used in assembly. Note: Some small parts may have been preassembled for shipping.
If a part is not in the parts bag, check to see if it has been preassembled.
M10 Nylon | M10 Split | Black M10 Curved | M10 Curved |
Locknut | Washer | Washer | Washer |
M4 x 16mm | M4 x 19mm | M6 x 10mm | Black M10 x 50mm Button |
Screw | Screw | Screw | Screw |
M10 x 50mm Button | M10 x 85mm Button | ||
Screw | Screw | ||
5