JVC CA-MXKB1 Using the Cassette Deck Listening to a Tape, Playing a Tape, To Fast-Wind a Tape

Page 19

Using the Cassette Deck (Listening to a Tape)

TAPE A 3

TAPE B 3

4/1

7

 

TAPE A 3

 

 

TAPE B 3

 

 

22

 

¢/¡

0 EJECT

0 EJECT

(Deck A)

(Deck B)

 

¡

 

 

7

 

 

 

3: Tape indicator

Deck indicators

*When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.

The Cassette Deck allows you to play, record, and dub audio tapes.

Listening to type I tape is suitable for this Cassette Deck.

The use of tapes longer than 120minutes (including 120 minute tapes) is not recommended, since char- acteristic deterioration may occur and these tapes easily jam in the pinch-rollers and the capstans.

One Touch Play

By pressing the TAPE A 3 or TAPE B 3 button, the System will come on, and if a tape is in the deck, it will start to play. If no tape is loaded, the operation is ignored.

Playing a Tape

You can use either Deck A or Deck B at a time for playback.

1 Press the 0 PUSH OPEN part for the deck you want to use.

2When the cassette holder opens, put a cas- sette in, with the exposed part of the tape

down, toward the base of the Unit.

The tape will travel from the left to right.

Tape travelling direction

If the cassette holder does not open, turn the System off, then back on and press the 0 PUSH OPEN part again.

3Close the cassette holder gently.

When both Deck A and Deck B contain a tape, the last deck to have a tape inserted is selected.

4Press the TAPE A 3 or TAPE B 3 button.

The selected Deck appears (for example, TAPE-A) and the Deck indicator “A” or “B” lights up on the display.

The Tape indicator (3) lights up on the display and the tape is played back.

The Cassette Deck automatically stops when one side of the tape has finished playing.

To stop playing, press the 7 button.

To remove the tape, stop the tape, and press the 0 PUSH OPEN part to open the Cassette Holder.

To Fast-Wind a Tape

During playback or in Stop mode, press the ¡ (FF) button on the Unit to fast-wind the tape onto the right side of the cassette without playing. (You can also use the ¢/¡ button on the Remote Control.)

During playback or in Stop mode, press the 22 (REW) button on the Unit to fast-wind the tape onto the left side of the cassette with- out playing. (You can also use the 4/22 button on the Remote Control.)

The Cassette Deck automatically stops when one side of the tape has finished playing.

During fast-winding the tape, you can change the tape travelling direction by pressing the ¡ (FF) or 22 (REW) button.

16

Image 19
Contents CA-MXKB2 CA-MXKB1 If in Doubt Consult a Competent Electrician Important for Laser ProductsAbove ALL Introduction FeaturesHow This Manual Is Organized Table of Contents Getting Started AccessoriesHow To Put Batteries In the Remote Control Using the Remote ControlAbout the FM Antenna Connecting the AM MW AntennaRear Panel of the Unit Connecting External Equipment Connecting the SpeakersCompu Play Connecting to the Wall OutletDemo Mode On the Remote ControlTurning the System On Turning the Power On and OffECO Mode ECO Basic OperationsFade-out Muting Fade Muting Adjusting the VolumeSelecting the Sound Mode Entering the Number with the Remote Control Numeric KeysOne Touch Radio Using the TunerTuning In a Station Select a station using one of the following methodsPress the 4 or ¢ button to select the preset number Presetting StationsTo Change the FM Reception Mode Using the UnitFor MP3 discs Using the CD PlayerWhen playing a CD-R or CD-RW For CA-MXKB2 onlyTo Load CDs Changing the MP3 Playback ModeTo Unload CDs To Select a Track Basics of Using the CD Player- Normal PlayTo Select a Group For MP3 Group mode only To Play CDsTo Exit and Re-enter Program Play Programming the Playing Order of the TracksTo Make a Program To Play the Program You Have MadeUnlocking the Tray Random PlayRepeating Tracks Tray Lock Function Changing the Display for CDPlaying a Tape Using the Cassette Deck Listening to a TapeTo Fast-Wind a Tape Tape a CD REC Start Tape B Dubbing Eject Using the Cassette Deck RecordingThings To Know Before You Start Recording REC START/STOPTo Record Any Sound Source to Tape Standard RecordingCD Synchro Recording Tape to Tape Recording DUB- BingListening to the External Equipment Using an External EquipmentAUX Setting the Clock Using the TimersFixing the Clock Selecting the music source Setting the Daily TimerSetting the OFF time Example Setting the on time ExampleDisplay Setting the REC Recording TimerTurning the Daily Timer On and Off Setting the volume levelSelect the preset station for recording Turning the REC Recording Timer On and OffSetting the on time you want the System to turn on Setting the OFF time you want the System to turn offWait for 5 seconds Setting the Sleep TimerTimer Priority During playback a source, press the Sleep ButtonCare And Maintenance Specification Troubleshooting0404HMMCREORI