Newcon Optik LRM 220SI operation manual Storage and Maintenance

Page 25

7. STORAGE AND MAINTENANCE

The unit is a sophisticated precision optical instrument equipped with laser and electronics. Therefore, it should be handled with due care.

∙Keep away from direct sunlight.

∙Avoid impacts, jolts, dust, moisture, and sharp changes of temperature.

∙Do not use the device at temperatures higher than 50oC (122oF).

∙Do not touch optical surfaces. Doing so may damage the anti-reflection coating.

∙Clean optical surfaces only with professional camera lens cleaning supplies.

∙Clean the exterior of the unit with a soft clean cloth.

∙Keep away from heating appliances and central heating.

∙Remove the battery when storing the device for long time.

∙All repair works must be performed only by an authorized service.

∙Prevent bright light from focussing through the eyepiece

21

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Laser Range Finder Monocular Page Read prior to activation Important InformationPage Table of Contents Principle of operation Brief DescriptionKey Features Front view Device AppearancePage Standard delivery set Delivery SETRange Finder Laser Measuring range Accuracy SpecificationsCompass Inclinometer PowerSpeed Detector EnvironmentalOperation Instructions To remove battery Changing battery To install a batteryMaximum distance Measuring procedureTarget selection logic Operation and service modes Accuracy correction Std Compass calibration Gating modeIndividual Measurement and Scanning regimes Data Recall mode Or M Additional display informationBest Measuring Technique Storage and Maintenance Compass shows zero at any direction TroubleshootingWhat This Warranty Does Not Cover WarrantyCustomer Support Quality Certificate Page Page Newcon Optik
Top Page Image Contents