Newcon Optik LRM 220SI operation manual Important Information, Read prior to activation

Page 3

IMPORTANT INFORMATION

Read prior to activation

You have just purchased a sophisticated electro-optical device that emits invisible laser radiation. To operate it properly, please, read this manual carefully.

NEVER direct laser beam at the eyes of people or animals

NEVER aim the unit at the Sun or bright sources of light

NEVER subject the unit to impacts

NEVER transport the unit without the case

NEVER disassemble the unit. This may be hazardous for you due to high voltage currents in the system

NEVER aim the unit at highly reflective objects like mirrors and retroreflective surfaces, which are in close proximity to the laser rangefinder. This can lead to the permanent damage of the photoreceiver incorporated into the device

ALWAYS keep the unit out of the reach of children

ALWAYS remove the battery when the device is not in use for a long period

ALWAYS store the unit in a dry place

Caution - use of controls or adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure

iii

Image 3
Contents Laser Range Finder Monocular Page Read prior to activation Important InformationPage Table of Contents Principle of operation Brief DescriptionKey Features Front view Device AppearancePage Standard delivery set Delivery SETSpecifications Range Finder Laser Measuring range AccuracyCompass Environmental PowerInclinometer Speed DetectorOperation Instructions To remove battery Changing battery To install a batteryMaximum distance Measuring procedureTarget selection logic Operation and service modes Accuracy correction Std Compass calibration Gating modeIndividual Measurement and Scanning regimes Data Recall mode Or M Additional display informationBest Measuring Technique Storage and Maintenance Compass shows zero at any direction TroubleshootingWhat This Warranty Does Not Cover WarrantyCustomer Support Quality Certificate Page Page Newcon Optik