Newcon Optik LRM 220SI operation manual Table of Contents

Page 5

TABLE OF CONTENTS
1.	BRIEF DESCRIPTION	2
Principle of operation		2
Key Features		3
2.	DEVICE APPEARANCE	4
3.	DELIVERY SET	6
Standard delivery set		6
4.	SPECIFICATIONS	7
5.	OPERATION INSTRUCTIONS	9
Changing battery		10
Measuring procedure		11
Maximum distance		11
Target selection logic		12
Operation and service modes		13
Accuracy correction		14
Compass calibration		16
Gating mode		16
Individual Measurement and Scanning regimes		17
Data Recall mode		18
Additional display information		19
6.	BEST MEASURING TECHNIQUE	20
7.	STORAGE AND MAINTENANCE	21
8.	TROUBLESHOOTING	22
9.	WARRANTY	23

Image 5

Contents Laser Range Finder Monocular Page Read prior to activation Important InformationPage Table of Contents Principle of operation Brief DescriptionKey Features Front view Device AppearancePage Standard delivery set Delivery SETCompass SpecificationsRange Finder Laser Measuring range Accuracy Inclinometer PowerSpeed Detector EnvironmentalOperation Instructions To remove battery Changing battery To install a batteryMaximum distance Measuring procedureTarget selection logic Operation and service modes Accuracy correction Std Compass calibration Gating modeIndividual Measurement and Scanning regimes Data Recall mode Or M Additional display informationBest Measuring Technique Storage and Maintenance Compass shows zero at any direction TroubleshootingWhat This Warranty Does Not Cover WarrantyCustomer Support Quality Certificate Page Page Newcon Optik