Newcon Optik LRM 220SI operation manual Brief Description, Principle of operation

Page 6

10.

CUSTOMER SUPPORT

24

11.

QUALITY CERTIFICATE

25

CAREFULLY READ ALL THE INSTRUCTIONS BEFORE

USING THE UNIT!

FAILURE TO OBEY THE INSTRUCTIONS WILL VOID

THE WARRANTY AND MAY CAUSE INJURY!

1. BRIEF DESCRIPTION

LRM 2200SI Laser Rangefinder Monocular (the unit) is an advanced laser range finder system that enables instant distance, direction, elevation, azimuth and speed measurement.

The unit complies with CFR 21, Part 1040.10.

High quality multi-coated optics are combined in this device with complex circuitry design to create a system that can outperform other product in its class.

Principle of operation

Once activated, the unit sends invisible, eye-safe laser pulses to the target. The pulses reflected from the target are captured and processed internally. The unit operates based on the time-of- flight principle meaning that range is calculated by measuring the delay between the sent and received laser pulses.

A built-in digital inclinometer measures the elevation simultaneously with distance measurement, in its turn elevation

2

Image 6
Contents Laser Range Finder Monocular Page Important Information Read prior to activationPage Table of Contents Brief Description Principle of operationKey Features Device Appearance Front viewPage Delivery SET Standard delivery setSpecifications Range Finder Laser Measuring range AccuracyCompass Speed Detector PowerInclinometer EnvironmentalOperation Instructions Changing battery To install a battery To remove batteryMeasuring procedure Maximum distanceTarget selection logic Operation and service modes Accuracy correction Std Gating mode Compass calibrationIndividual Measurement and Scanning regimes Data Recall mode Additional display information Or MBest Measuring Technique Storage and Maintenance Troubleshooting Compass shows zero at any directionWarranty What This Warranty Does Not CoverCustomer Support Quality Certificate Page Page Newcon Optik