Continued
To record an AM (LW/MW) station — Beat Cut | CD Direct Recording |
English
While recording an AM (LW/MW) broadcast, beats may be heard (which are never heard when listening to the broadcast without recording it).
If this occurs, press PROGRAM/RANDOM repeatedly, while recording, until the beats are reduced.
•Each time you press the button, the display changes to show the following:
CUT1
CUT2 
CUT3 
CUT4 
Dubbing Tapes
It is preferable that the tape type (type I or II) you record from be the same as the tape type you record onto when dubbing tapes.
1 Press TAPE 23, then 7.
2 Put the source cassette in deck A, and a recordable cassette into deck B.
•Put the cassettes in both decks so that the tapes will run in the forward (3) direction.
3 Press DUBBING.
Dubbing starts.
To stop during dubbing, press 7.
To record on both sides — Reverse Mode
Press REVERSE MODE so that the Reverse Mode indicator lights up as —
To cancel Reverse Mode, press the button again so that the Reverse Mode indicator lights up as —
Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have made for Program play.
1 | Put a recordable cassette into deck B. |
|
2 | Place a disc correctly on the circle of the disc | |
| tray, with its label side up. | 3 |
|
| |
3 | Press one of the disc number | 2 |
| buttons (CD1 to CD3) to select the | 1 |
| disc, then 7. | |
|
| |
4 | Press CD REC START. |
|
| “CD REC” appears, and the REC (recording) |
|
| indicator lights up on the display. |
|
| Deck B starts recording and the CD player |
|
| starts playing. |
|
| When the recording is done, “CD REC FINISHED” | |
| appears on the display, and the CD player and deck B | |
| stop. |
|
To stop during CD Direct Recording, press 7or REC
START/STOP.
To record on both sides — Reverse Mode
Press REVERSE MODE so that the Reverse Mode indicator lights up as — 
• When using the Reverse Mode for CD Direct Recording, start recording in the forward (3) direction first. When the tape reaches its end while recording a song in the forward direction (3), the last song will be recorded at the beginning of the reverse side (2).
If you start recording on the reverse side (2), recording will stop when recording is done only on one side (reverse) of the tape.
To cancel Reverse Mode, press the button again so that the Reverse Mode indicator lights up as — 
– 20 –