Assembly Instructions

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our toll-free number for assistance 1 (800) 375-7520or e-mail us at: parts@staminaproducts.com

Lift from the

Front Stabilizer

Make the tab face down

for assembly.

STEP 1: Attach the REAR STABILIZER(2) to the MAIN FRAME(1) with BUTTON HEAD BOLTS (M10x1.5x25mm)(64), WASHERS(M10)(78), and LOCK WASHERS(M10)(76).

STEP 2: Thread the NUTS(3/8"-16)(79)all the way to the bottom of the threaded rod on the STANDS(59). Lift the front stabilizer on the MAIN FRAME(1) and place a temporary spacer (wood block or thick book) under the front of the MAIN FRAME(1). Thread the three STANDS(59) into the MAIN FRAME(1). Remove the temporary spacer.

NOTE: See page 12 for detailed leveling instructions to prevent rocking.

STEP 3: Make the tab in the edge of the OVAL ENDCAPS(58) face down, then press the OVAL ENDCAPS

(58)into both ends of the front stabilizer of the MAIN FRAME(1).

STEP 4: Attach the PEDAL CAP(29L) to the LEFT PEDAL ARM(6) and the PEDAL CAP(29R) to the RIGHT PEDAL ARM( 7) with SOCKET HEAD BOLTS(M6x1x12mm)(65).

NOTE: It will be easier to attach the PEDAL CAPS(29L, 29R) to the PEDAL ARMS(6, 7) by raising the PEDAL ARMS(6,7) and then attaching the PEDAL CAPS(29L, 29R). Please have a partner hold the raised pedal arm as you attach the PEDAL CAPS(29L, 29R). This way you are not lying on the floor trying to attach the PEDAL CAPS(29L, 29R).