OPERATIONAL INSTRUCTIONS (continued)
Transmission LED Indicator
For checking operation of transmitter, the red LED indicator will flash indicating the transmitter is in operation. Adjust the transmitter position to keep the LED indicator flashing consistently for accurate readings. (See illustration below.)
LED Indicator
NOTE: If your heart rate is inconsistent or not tracking on your workout console, do the following:
Moisten the grooved electrode areas on the back of the chest strap again and make sure they are in contact with the skin. Your skin may be dry when you begin your workout and the moisture is necessary to ensure contact. As you sweat, contact will improve.
Tighten the elastic strap so it remains in place as you exercise. Movement of the electrodes will result in inaccurate or erratic signal and readings.
Clean the electrodes as dirt can interfere with transmission. Use a mild soap and water and dry with a soft towel.
Transmitter Care and Maintenance
Wash regularly with mild soap and water solution and dry with a soft towel being careful not to abrade the electrodes.
Store in a cool, dry place. Make sure the electrodes aren't stored with any wet material and never store a wet transmitter in
Do not bend or stretch the transmitter.
16