JVC CA-MXG70, CA-MXGT80 manual Using Recording Timer, Select the preset station, If necessary

Page 29

Continued

English

Using Recording Timer

With Recording Timer, you can make a tape of a radio broadcast automatically. You can set the timer whether the system is on or off.

How Recording Timer actually works

The unit automatically turns on, tunes into the specified station, sets the volume level to “VOL MIN,” and starts

recording when the on-time comes (the indicator flashes just before the on-time, and continues flashing while the timer is operating). Then, when the off-time comes (“OFF” appears just before the off-time), the unit automatically turns off (on standby).

The timer setting remains in memory until you change it.

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

To correct a mis-entry while setting the timer, press

CANCEL/DEMO.

On the unit ONLY:

1 Put a recordable cassette into deck B.

2 Press CLOCK/TIMER repeatedly until “REC” appears on the display.

The REC (Recording Timer) indicator also starts flashing on the display.

Each time you press the button, the timer setting modes change as follows:

DAILY ON TIME REC

Canceled Clock ON TIME setting

(See page 9.)

4 Set the on-time you want the unit to turn on at.

1) Turn 4/ ¢ to set the hour, then press SET/DISPLAY.

2)Turn 4/ ¢to set the minute, then press SET/DISPLAY.

“OFF TIME” appears for 2 seconds, then the unit enters off-

time setting mode.

5 Set the off-time you want the unit to turn off (on standby) at.

1)Turn 4/ ¢ to set the hour, then press

SET/DISPLAY.

2)Turn 4/ ¢ to set the minute, then press

SET/DISPLAY.

The unit enters preset station selecting mode.

6 Select the preset station.

1)Turn 4/ ¢to select the band (“TUNER FM” or “TUNER AM”), then press SET/DISPLAY.

2)Turn 4/ ¢ to select a preset channel number, then press SET/DISPLAY.

The REC (Recording Timer) indicator stops flashing and remains lit. The settings you have done are shown on the display in sequence.

7 Press STANDBY/ON

to

STANDBY/ON

turn off the unit (on standby)

STANDBY

if necessary.

 

 

If you want to listen to another source while recording Press REC START/STOP or 7 to stop recording. Without stopping it, you cannot change the source.

Even if you unplug the AC power cord or if a power failure occurs

Once you set the timer, the timer setting may remain stored in memory in a few days. In this case, check whether the timer setting still remains or not.

3 Press CLOCK/TIMER again.

“ON TIME” appears for 2 seconds, then the unit enters on-time setting mode.

– 24 –

Image 29
Contents CA-MXGT90/CA-MXGT80 CA-MXG70 Page English Español Português CA-MXGT90 CA-MXGT80 CA-MXG70 Class Laser Product About This Manual PrecautionsIntroduction Contents Front Panel Location of the Buttons and ControlsFront Panel Become familiar with the buttons and controls on your unitSee pages in the parentheses for details Display WindowFM/AM button and lamp 9 AUX button and lampRemote Control Remote ControlConnecting Antennas Supplied AccessoriesGetting Started FM antennaTurn the AM loop antenna until you have the best reception Connecting SpeakersClose the speaker terminals AM antennaAdjusting the Voltage Selector Connecting Other EquipmentCanceling the Display Demonstration On the unit onlySetting the AM Tuner Interval Spacing Setting the Clock Turning On or Off the PowerCommon Operations Selecting the SourcesTo turn down the volume level temporarily Adjusting the VolumeReinforcing the Bass Sound Selecting the Sound ModesTo use your own sound mode Creating Your Own Sound Mode Manual ModeOn the unit only Select one of the preset sound modes Presetting Stations Tuning in a StationTuning in a Preset Station Listening to FM and AM BroadcastsLoading CDs Playing Back CDs CD/CD-R/CD-RWPress the same 0 you have pressed in step Repeat steps 1 to 3 to place other CDsBasic CD Operations Playing Back the Entire Discs Continuous PlayProgram Play Random play also stops when one of the disc trays is opened Random indicator also lights up onProhibiting Disc Ejection Tray Lock To exit from Random play mode, press Random againLocating the Beginning of a Song Music Scan Playing Back TapesPlaying Back a Tape Recording a Tape on Deck B RecordingPress Eject 0for the deck B To protect your recordingDubbing Tapes To record on both sides Reverse ModeCD Direct Recording Press DubbingAuto Edit Recording Connect the microphones Press CD 3/8, then Using the MicrophonesSining along Karaoke Using Daily Timer Using the TimersPress CLOCK/TIMER again How Daily Timer actually worksWhen selecting Tuner FM or Tuner AM If you have set the Daily Timer With the unit turned onWhen selecting CD Turn 4/ ¢to set the volume levelSelect the preset station Using Recording TimerHow Recording Timer actually works Unit enters preset station selecting modeTimer Priority Using Sleep TimerOn the remote control only Press Sleep Wait for about 5 seconds after specifying the time lengthCleaning the unit MaintenanceTo clean the disc Handling discsSymptom TroubleshootingSpecifications CA-MXGT80 CA-MXG70 Deste equipamento. Caso não corresponda, reajuste o Posição do seletor de voltagem localizado na parte externaSeletor de voltagem a fim de evitar avarias ou riscos de Incêndio e choque elétricoPage Page

CA-MXG70, CA-MXGT80 specifications

The JVC CA-MXGT80 and CA-MXG70 are remarkable compact audio systems that deliver impressive sound quality and a host of features designed for music enthusiasts and casual listeners alike. These systems are ideal for those who appreciate a powerful audio experience without compromising on space or style.

One of the standout features of both the CA-MXGT80 and CA-MXG70 is their robust audio output. The CA-MXGT80 boasts a total power output of 80 watts, while the CA-MXG70 offers 70 watts. This ensures that even in larger rooms, listeners can enjoy rich, dynamic sound that fills the space. The speakers are designed to minimize distortion, providing clarity across a wide range of frequencies.

Both models come equipped with a built-in CD player, allowing users to enjoy their favorite albums with high-quality playback. They support various CD formats, including CD-R/RW, ensuring compatibility with a vast library of music. Additionally, they feature AM/FM radio with a digital tuner, enabling listeners to easily access their preferred radio stations.

In terms of connectivity, the JVC CA-MXGT80 and CA-MXG70 are versatile systems. They include auxiliary input ports, allowing users to connect external devices such as smartphones, tablets, or laptops. Furthermore, Bluetooth technology is incorporated into both models, facilitating wireless streaming of music from compatible devices without the need for cumbersome cables.

The design of the CA-MXGT80 and CA-MXG70 is sleek and modern, making them aesthetically pleasing additions to any room. The LED display provides easy access to all controls and settings, while the intuitive remote control enhances user convenience.

Another notable feature is the equalizer settings, which allow users to customize audio output according to their listening preferences. Whether enjoying pop, rock, jazz, or classical music, users can tailor the sound profile to suit their tastes.

Both audio systems also support USB playback, making it easy to play music directly from flash drives. This flexibility ensures that users can enjoy their digital music collections seamlessly.

In summary, the JVC CA-MXGT80 and CA-MXG70 are compact yet powerful audio systems that offer a wide array of features for music lovers. With excellent sound quality, multiple playback options, and modern connectivity, they are an attractive choice for anyone looking to enhance their audio experience. Whether for home use or as a portable solution, these models stand out in their category.