GB USA
thoroughly every 1
■To ensure that the safety level is kept to the highest possible standard, determined by its construction, this product should be serviced regulary (once a year) by specialist retailers.
■Instruct people using the equipment (in particular children) on possible sources of danger during exercising.
■Before beginning your program of exercise, consult your doc- tor to ensure that you are fit enough to use the equipment. Base your program of exercise on the advice given by your doctor. Incorrect or excessive exercise may damage your health!
■Any interference with parts of the product that are not descri- bed within the manual may cause damage, or endanger the person using this machine. Extensive repairs must only be car- ried out by KETTLER service staff or qualified personnel trained by KETTLER.
■In case of enquiry, please contact your KETTLER dealer.
■In choosing the location of the apparatus, ensure a sufficient sa- fety distance from any obstacles. The apparatus must not be mounted in the immediate vicinity of main passageways (paths, doorways, corridors).
!Caution: While assembly of the product keep off children’s re- ach (Choking hazard - contains small parts).
Handling the equipment
■Before using the equipment for exercise, check carefully to en- sure that it has been correctly assembled.
■Before beginning your first training session, familiarize yourself thoroughly with all the functions and settings of the unit.
■It is not recommended to use or store the apparatus in a damp room as this may cause it to rust. Please ensure that no part of the machine comes in contact with liquids (drinks, perspiration etc.). This may cause corrosion.
■The machine is designed for use by adults and children should not be allowed to play with it. Children at play behave unpre- dictably and dangerous situations may occur for which the ma- nufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly.
■The crosstrainer complies with the DIN EN 957
■A slight production of noise at the bearing of the centrifugal mass is due to the construction and has no negative effect upon operation. Possibly occurring noise during reverse pedalling re- sult from engineering and are absolutely safe.
Instructions for Assembly
■Ensure that you have received all the parts required (see check list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer.
■Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the dia- grams. The correct sequence is given in capital letters.
■The equipment must be assembled with due care by an adult person. If in doubt call upon the help of a second person, if possible technically talented.
■Please note that there is always a danger of injury when wor- king with tools or doing manual work. Therefore please be ca- reful when assembling this machine.
■Ensure that your working area is free of possible sources of danger, for example don’t leave any tools lying around. Al- ways dispose packaging material in such a way that it may not
■Use for your regular cleaning, maintenance and care our ap- pliance maintenance set (Article no.
■The crosstrainer has a magnetic brake system.
■To operate correctly, the pulse function requires a minimum vol- tage of 2,7 volts (only for computers working with batteries).
■The equipment is dependent of revolutions per minute.
■Please ensure that liquids or perspiration never enter the ma- chine or the electronics.
■Before use, always check all screws and
■Always wear suitable shoes when using.
■All electric appliances emit electromagnetic radiation when in operation. Please do not leave especially
cause any danger. There is always a risk of suffocation if chil- dren play with plastic bags!
■The fastening material required for each assembly step is shown in the diagram inset. Use the fastening material exactly as instructed. The required tools are supplied with the equip- ment.
■Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be repla- ced.
■For technical reasons, we reserve the right to carry out preli- minary assembly work (e.g. addition of tubing plugs).
List of spare parts page 25-27
When ordering spare parts, always state the full article number, | duct (see handling). |
Example order: Art. no. |
4