INTRODUCTION IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
ELLIPTICAL
OPERATION
CONDITIONING TROUBLESHOOTING LIMITED
GUIDELINES & MAINTENANCE WARRANTY
12
A S S E M B LY STEP 6 |
UPPER HANDLEBAR |
UPPER HANDLEBAR |
HANDLEBAR COVERS |
NOTE: There is NO hardware bag for this step.
A)Remove
B)Slide right UPPER HANDLEBAR onto LOWER HANDLEBAR and secure by reinserting
C)Snap the front and back HANDLEBAR COVERS together onto the UPPER HANDLE BARS. Note the position of the snap tabs on the covers before snapping into position.
D)Repeat on other side.
A S S E M B LY STEP 7 |
SCREWS (Q) |
ELBOW JOINT |
INSIDE ELBOW COVER |
OUTSIDE ELBOW COVER |
A)Open HARDWARE BAG FOR STEP 7.
B)Attach the OUTSIDE ELBOW COVER to the ELBOW JOINT using 1 SCREW (Q).
C)Snap the INSIDE ELBOW COVER onto the OUTSIDE ELBOW COVER. Note the position of the snap tabs before snapping into position.
D)Attach the INSIDE ELBOW COVER to the ELBOW JOINT using 1 SCREW (Q).
E)Repeat on other side.
HARDWARE BAG FOR STEP 7 CONTENTS :
SCREW (Q) 15 mm Qty: 4
13
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES
7/7/08 4:29:22 PM |