Horizon Fitness SXE 7.7 manual YOU’RE Finished, SET Screws

INTRODUCTION	A S S E M B LY STEP 6
IMPORTANT	UPPER HANDLEBAR
PRECAUTIONS
ASSEMBLY	PRE-ATTACHED
	SCREWS
	HANDLEBAR COVERS
YOU
BEFORE
BEGIN
ELLIPTICAL OPERATION	A) Slide UPPER HANDLEBARS onto LOWER HANDLEBARS and align NOTCH with TAB making sure handlebars
	NOTE: There is NO hardware bag for this step.
	are joined together completely. Secure UPPER HANDLEBARS to LOWER HANDLEBARS using PRE-ATTACHED
	SET SCREWS.
CONDITIONING	B) Snap the front and back HANDLEBAR COVERS together onto the UPPER HANDLE BARS.
	C) Repeat on other side.
GUIDELINES
	Note the position of the snap tabs on the covers before snapping into position.
TROUBLESHOOTING
&
MAINTENANCE	Reminder: The upper and lower handlebars are marked with an L if they are to be used on the left-hand side
	of the elliptical or an R if they are to be used on the right-hand side of the elliptical. If the handlebars are
	assembled on the incorrect side of the elliptical, the unit will not function correctly.
WARRANTY
LIMITED
	12

A S S E M B LY STEP 7

CONSOLE

CONSOLE WIRES

BOLTS (Q)

CONSOLE WIRES

BOLTS (P)

A)Open HARDWARE BAG FOR STEP 7.

B)Attach the CONSOLE MAST wires to the CONSOLE.

C)Carefully tuck the CONSOLE MAST wires into the CONSOLE MAST before attaching the CONSOLE.

DO NOT PINCH WIRES!

D)Attach CONSOLE to the CONSOLE MAST using the 4 BOLTS (P) and 4 BOLTS (Q). NOTE: The longer bolts are closest to the user when on the Elliptical.

Connect AC ADAPTOR to the AC ADAPTOR INPUT, located at front of the main frame. Connect ADAPTOR to a power outlet. Flip the switch to the ON position. After a “beep”, the CONSOLE will turn on.

HARDWARE BAG FOR STEP 7 CONTENTS :

BOLT (P)	BOLT (Q)
15 mm	10 mm
Qty: 4	Qty: 4

YOU’RE FINISHED!

13

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

ELLIPTICAL OPERATION

LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES

SXE7.7_Rev.1.6.indd 12-13 8/16/07 11:01:48 AM