JVC CA-UXB70, SP-UXB70 manual Receiving FM Stations with RDS, Changing the RDS Information

Page 18

Receiving FM Stations with RDS

RDS (Radio Data System) allows FM stations to send an additional signal along with their regular program signals. For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc.

When tuned in to an FM station which provides the RDS service, the RDS indicator lights up on the display.

With the unit, you can receive the following types of RDS signals.

PS (Program Service):

Shows commonly known station names.

PTY (Program Type):

Shows types of broadcast programs.

RT (Radio Text):

Shows text messages the station sends.

Enhanced Other Networks:

Provides information about the types of the programs sent by other RDS stations.

More about RDS

Some FM and AM (MW) stations do not provide RDS signals.

RDS services vary among FM RDS stations. For details on RDS services in your area, check with local radio stations.

RDS may not work correctly if the received station is not transmitting the signals properly or if the signal strength is weak.

Changing the RDS Information

You can see RDS information on the display while listening to an FM station.

On the remote control ONLY:

Press RDS DISPLAY.

DISPLAY

 

RDS

Each time you press the button, the display changes to show the following information:

 

PS

 

PTY

 

 

RT

 

 

 

 

 

 

(Program Service) (Program Type)

(Radio Text)

Station frequency (or preset channel no.)

If no PS, PTY, or RT signals are sent by a station “NO PS,” “NO PTY,” or “NO RT” appears on the display.

On the characters displayed

When the display shows PS, PTY or RT signals: –The display shows upper case letters only.

–The display cannot show accented letters; for example, “A” may represent accented “A’s” like “Á, Â, Ã, À, Ä and Å.”

Searching for Programs by PTY Codes (PTY Search)

One of the advantages of RDS is that you can locate a particular kind of program by specifying the PTY codes.

For details on the PTY codes, see “Additional Information” on page 32.

To search for a program using the PTY codes

REMEMBER you must preset FM RDS stations to use the PTY codes. If not yet done, see page 13.

There is a time limit in doing the following steps. If the setting is canceled before you finish, start over from step 1.

On the remote control ONLY:

1

Press PTY SEARCH.

SEARCH

 

 

 

 

PTY

 

 

 

“PTY SELECT” appears on the display.

 

 

 

 

 

 

 

 

 

 

2

Press PTY SELECT 9 or

 

 

 

 

PTY SELECT ( until the PTY code you

 

 

 

want appears on the display.

 

Each time you press the buttons, the PTY codes change as follows:

NONE Ô NEWS ÔAFFAIRS Ô INFO

ÔSPORT Ô EDUCATE Ô DRAMA

ÔCULTURE Ô SCIENCE ÔVARIED

ÔPOP M Ô ROCK M Ô EASY M

ÔLIGHT M Ô CLASSICS Ô OTHER M

ÔWEATHER Ô FINANCE Ô CHILDREN

ÔSOCIAL Ô RELIGION Ô PHONE IN

ÔTRAVEL Ô LEISURE Ô JAZZ

ÔCOUNTRY Ô NATION M Ô OLDIES

ÔFOLK M Ô DOCUMENT Ô TEST

ÔALARM Ô (back to the beginning)

3 Press PTY SEARCH once again.

While searching, “SEARCH” flashes and the selected PTY code appears on the display.

The unit searches 30 preset FM stations, stops when it finds the one you have selected (“FOUND” and the selected PTY code appear), and tunes in that station.

If no program is found, “NOT FOUND” appears on the display and the unit returns to the last received station.

To stop searching any time during the process, press PTY

SEARCH while searching.

15

Image 18
Contents Instructions Important for Laser Products Above ALL Precautions IntroductionAbout This Manual Contents Location of the Buttons and Controls Front PanelFront panel Display window on the front panel Display windowRemote Control See pages in parentheses for detailsUnpacking Connecting AntennasGetting Started FM antenna To connect an outdoor FM antennaAM MW antenna Connecting SpeakersRelease your finger from the clamp To connect an outdoor AM MW antennaTo remove the speaker grilles Connecting Other EquipmentPutting the Batteries into the Remote Control To connect audio equipmentOn the remote control only Setting the ClockOn the remote control only Press CLOCK/TIMER Press Disc UP or Disc Down to adjust the minute, then pressTurning On the Power To turn off the unit automatically Auto StandbyReinforcing the Bass Sound Adjusting the VolumeOn the remote control On the unitAdjusting the Tone Changing the Display BrightnessTuning in to a Station Presetting StationsListening to FM and AM MW Broadcasts Tuning in to a Preset Station Press SET againChanging the RDS Information On the remote control only Press PTY SearchReceiving FM Stations with RDS Searching for Programs by PTY Codes PTY SearchWait for about 3 seconds after specifying the data type Switching Temporarily to a Program Type of Your ChoiceType you want flashes on the display To activate the Enhanced Other Networks functionPlaying Back Discs on the 5-CD Changer When playing a CD-R or CD-RWAbout the disc indicators Loading DiscsPlaying Back All the Entire Discs -Continuous Play Basic Disc OperationsPress Play Mode repeatedly until On the remote control On the remote control onlyOn the remote control only Load discs into the 5-CD Changer Programing the Track Playing Order -Program PlayProgram other tracks you want To check the program contentsPlaying at Random-Random Play CD Random appears on DisplayRepeating Tracks or Discs-Repeat Play Prohibiting Disc EjectionPlaying Back a Tape Press REV.MODE reverse modePlaying Back Tapes Prohibiting Cassette EjectionCheck the recording direction for the tape RecordingRecording on a Tape Press REC recordingRecording Discs Disc Synchronized Recording Control to select ALL CD Press CD REC Mode on the remoteWhen recording discs Press RECYou want to record Control to select 1ST TrackPress REC while 1ST Track still First Track RecordingSet the on-time you want the unit Using the TimersUsing the Daily Timer and the Recording Timer To turn onWhen you have selected CD Program in step Adjust the clock if neededTo deactivate the timer temporarily, press Press STANDBY/ON to turn off the unit if the unit is onUsing the Sleep Timer On the remote control only Press SleepHow the Sleep Timer actually works Handling discs MaintenanceCleaning the unit To keep the best recording and playback sound qualityTroubleshooting SymptomPossible Cause Action Specifications Additional InformationUX-B70 Micro Component System

SP-UXB70, CA-UXB70 specifications

The JVC SP-UXB70 and CA-UXB70 are compact audio systems designed to deliver high-quality sound and versatile playback options. With their modern design and robust features, these systems cater to both casual listeners and audio enthusiasts.

One of the standout features of the JVC SP-UXB70 is its powerful audio output. The system boasts a peak power of 240 Watts, ensuring that it can fill any room with rich sound. The inclusion of a high-performance woofer enhances bass response, providing an immersive listening experience for music, movies, and more.

The CA-UXB70 component serves as the central hub of the audio system. It comes equipped with a built-in CD player, allowing users to enjoy their favorite CDs with ease. Additionally, the system supports various playback formats, including MP3 and WMA, which are ideal for digital music collections. For users who prefer wireless connectivity, Bluetooth compatibility is a significant advantage, enabling seamless streaming from smartphones and tablets without the need for cables.

Another impressive feature of the JVC SP-UXB70 is its FM/AM tuner, offering access to a wide range of radio stations. Users can easily program their favorite stations, making it convenient to enjoy live broadcasts. The system also includes a USB port, allowing for direct playback from USB drives, further enhancing its versatility.

The design of the JVC SP-UXB70 is both stylish and functional. Its compact size allows it to fit into various spaces without sacrificing sound quality. The user-friendly interface makes it easy to navigate through different functions and settings. The inclusion of a remote control adds convenience, allowing users to adjust settings from a distance.

Moreover, the system features a range of sound enhancement technologies, including a built-in equalizer. This allows users to tailor the sound experience to their preferences, whether they enjoy bass-heavy tracks or crystal-clear vocals. The JVC SP-UXB70 and CA-UXB70 are equipped to meet diverse listening needs, providing an audio solution that is adaptable and high-performance.

In summary, the JVC SP-UXB70 and CA-UXB70 stand out as excellent choices for anyone in search of a compact, feature-rich audio system. With their powerful sound output, versatile playback options, and modern design, these systems are perfect for enhancing any audio experience, be it at home or on the go.