JVC SP-UXB70, CA-UXB70 manual Recording Discs Disc Synchronized Recording

DISC UP

DISC DOWN

Continued

Recording Discs

—Disc Synchronized Recording

You have three methods to record from discs onto a tape. Using the synchronized recording methods, you can start and stop disc play and recording at the same time.

•One Disc Synchronized Recording—Records the entire disc.

•All Discs Synchronized Recording—Records all loaded discs continuously (Continuous Play) or at random (Random Play), or the program you have made (Program Play). See page 25.

•First Track Recording—Records the first track of each disc. See page 26.

•One Track Recording—Records just the track you want during play. See page 26.

•Set the Reverse Mode and the tape direction properly to record on both side of the tape. (See page 23.)

If the front side of the tape ends in the middle of a track, the recording on the reverse side starts from the beginning of that track

(if the reverse mode is set to ).

However, when recording in the Random Play mode, recording on the reverse side does not starts from the beginning of the track.

“NO REC” will appear on the display when you press REC in the following cases:

•If no cassette is inserted.

•If a protected tape is inserted.

•If any tray is open when the source is the CD player.

One Disc Synchronized Recording

1 Insert a recordable cassette into the cassette compartment with the exposed part of the tape facing left.

2 Load the disc you want to record into the 5- CD Changer.

•If the current playing source is not the CD player, press 3/8 CD, then 7 before going to the next step.

3 Select the disc number you want to record. On the remote control:

Press DISC UP or DISC

DOWN.

On the unit:

Press DISC SELECT repeatedly.

DISC

SELECT

CD

4 Press CD REC MODE on the	MODE
	CD REC
remote control to select “1 CD.”

Each time you press the button, the recording mode changes as follows:

1 CD ALL CD 1ST TRACK

1 2 3 4 5

CD

5 Press REC while “1 CD” still	REC
remains on the display.
The REC indicator lights up on the display and
recording starts.

•Make sure to press the button before “1 CD” goes off; otherwise, recording will start in the All Discs Synchronized Recording mode (see page 25).

1 2 3 4 5

CD REC

Current track	Elapsed playing
number	time

When the selected disc is recorded, recording will stop. Both the 5-CD changer and the cassette deck stop automatically.

To stop while recording, press 7.

The tape stops after 4 seconds.

To remove the cassette, press 0 on the unit.

When recording a disc

A 4-second blank is automatically made on the tape before each track. To record without the blank, follow the procedure below:

1Load only the disc you want to record into the 5-CD Changer.

2Select the disc number you have loaded. On the remote control:

Press DISC UP or DISC DOWN when the current playing source is the CD player.

On the unit:

Press DISC SELECT repeatedly.

3Press 3/8 CD twice so that disc playback is paused.

•If the pausing position is not “0:00,” you can skip back to “0:00” by pressing 4 (or 4 DOWN on the unit).

4Press REC to start recording.

When the disc is recorded, recording will stop.

You cannot exchange a disc while recording another disc.

Pressing CD REC MODE changes the disc playback mode to Continuous Play and cancels the Repeat Play mode.

24