JVC SP-UXB70, CA-UXB70 manual Maintenance, Cleaning the unit, Handling discs

Page 33

Maintenance

To get the best performance of the unit, keep your discs, tapes and mechanism clean.

General Notes

Handling cassette tapes

In general, you will have the best performance by keeping your discs, tapes and the mechanism clean.

Store discs and tapes in their cases, and keep them in cabinets or on shelves.

Cleaning the unit

Stains on the unit

Should be wiped off with a soft cloth. If the unit is heavily stained, wipe it with a cloth soaked in water-diluted neutral detergent and wrung well, then wipe clean with a dry cloth.

Since the unit may deteriorate in quality, become damaged or have its paint peel off, be careful about the following:

DO NOT wipe it with a rough cloth.

DO NOT wipe it too vigorously.

DO NOT wipe it with thinner or benzine.

DO NOT apply any volatile substance such as an insecticide to it.

DO NOT allow any rubber or plastic to remain in contact with it for a long time.

Handling discs

Remove the disc from its case by holding it at the edge while pressing

the center hole lightly.

• Do not touch the shiny surface of the disc, or bend the disc.

• Put the disc back in its case after use to prevent warping.

• Be careful not to scratch the surface of the disc when placing it back in its case.

• Avoid exposure to direct sunlight, temperature extremes, and moisture.

To clean the disc

Wipe the disc with a soft cloth in a straight line from center to edge.

DO NOT use any solvent—such as conventional record cleaner, spray, thinner, or benzine—to clean the disc.

• If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating.

If the tape is loose, it may get stretched, cut, or caught in the cassette.

Be careful not to touch the tape surface.

Avoid storing tapes in any of the following places:

– In dusty places

– In direct sunlight or heat

In moist areas

On a TV or speaker

Near a magnet

To keep the best recording and playback sound quality

You need to clean the heads.

Clean the heads after every 10 hours of use with

a wet-type head cleaning tape (available at electronic and audio shops).

When the head becomes dirty, the following symptoms will occur:

Sound quality is reduced.

Sound level decreases.

Sound drops out.

Do not play dirty or dusty tapes.

Do not touch the highly-polished head with any metallic or magnetic tools.

To demagnetize the head

Turn off the unit, and use a head demagnetizer (available at electronic and audio shops).

30

Image 33
Contents Instructions Important for Laser Products Above ALL Precautions IntroductionAbout This Manual Contents Location of the Buttons and Controls Front PanelFront panel Display window Display window on the front panelSee pages in parentheses for details Remote ControlGetting Started Connecting AntennasUnpacking FM antenna To connect an outdoor FM antennaRelease your finger from the clamp Connecting SpeakersAM MW antenna To connect an outdoor AM MW antennaPutting the Batteries into the Remote Control Connecting Other EquipmentTo remove the speaker grilles To connect audio equipmentOn the remote control only Press CLOCK/TIMER Setting the ClockOn the remote control only Press Disc UP or Disc Down to adjust the minute, then pressTo turn off the unit automatically Auto Standby Turning On the PowerOn the remote control Adjusting the VolumeReinforcing the Bass Sound On the unitChanging the Display Brightness Adjusting the ToneTuning in to a Station Presetting StationsListening to FM and AM MW Broadcasts Press SET again Tuning in to a Preset StationReceiving FM Stations with RDS On the remote control only Press PTY SearchChanging the RDS Information Searching for Programs by PTY Codes PTY SearchType you want flashes on the display Switching Temporarily to a Program Type of Your ChoiceWait for about 3 seconds after specifying the data type To activate the Enhanced Other Networks functionAbout the disc indicators When playing a CD-R or CD-RWPlaying Back Discs on the 5-CD Changer Loading DiscsBasic Disc Operations Playing Back All the Entire Discs -Continuous PlayOn the remote control only Load discs into the 5-CD Changer On the remote control On the remote control onlyPress Play Mode repeatedly until Programing the Track Playing Order -Program PlayPlaying at Random-Random Play To check the program contentsProgram other tracks you want CD Random appears on DisplayProhibiting Disc Ejection Repeating Tracks or Discs-Repeat PlayPlaying Back Tapes Press REV.MODE reverse modePlaying Back a Tape Prohibiting Cassette EjectionRecording on a Tape RecordingCheck the recording direction for the tape Press REC recordingRecording Discs Disc Synchronized Recording When recording discs Press CD REC Mode on the remoteControl to select ALL CD Press RECPress REC while 1ST Track still Control to select 1ST TrackYou want to record First Track RecordingUsing the Daily Timer and the Recording Timer Using the TimersSet the on-time you want the unit To turn onTo deactivate the timer temporarily, press Adjust the clock if neededWhen you have selected CD Program in step Press STANDBY/ON to turn off the unit if the unit is onUsing the Sleep Timer On the remote control only Press SleepHow the Sleep Timer actually works Cleaning the unit MaintenanceHandling discs To keep the best recording and playback sound qualityTroubleshooting SymptomPossible Cause Action Additional Information SpecificationsUX-B70 Micro Component System

SP-UXB70, CA-UXB70 specifications

The JVC SP-UXB70 and CA-UXB70 are compact audio systems designed to deliver high-quality sound and versatile playback options. With their modern design and robust features, these systems cater to both casual listeners and audio enthusiasts.

One of the standout features of the JVC SP-UXB70 is its powerful audio output. The system boasts a peak power of 240 Watts, ensuring that it can fill any room with rich sound. The inclusion of a high-performance woofer enhances bass response, providing an immersive listening experience for music, movies, and more.

The CA-UXB70 component serves as the central hub of the audio system. It comes equipped with a built-in CD player, allowing users to enjoy their favorite CDs with ease. Additionally, the system supports various playback formats, including MP3 and WMA, which are ideal for digital music collections. For users who prefer wireless connectivity, Bluetooth compatibility is a significant advantage, enabling seamless streaming from smartphones and tablets without the need for cables.

Another impressive feature of the JVC SP-UXB70 is its FM/AM tuner, offering access to a wide range of radio stations. Users can easily program their favorite stations, making it convenient to enjoy live broadcasts. The system also includes a USB port, allowing for direct playback from USB drives, further enhancing its versatility.

The design of the JVC SP-UXB70 is both stylish and functional. Its compact size allows it to fit into various spaces without sacrificing sound quality. The user-friendly interface makes it easy to navigate through different functions and settings. The inclusion of a remote control adds convenience, allowing users to adjust settings from a distance.

Moreover, the system features a range of sound enhancement technologies, including a built-in equalizer. This allows users to tailor the sound experience to their preferences, whether they enjoy bass-heavy tracks or crystal-clear vocals. The JVC SP-UXB70 and CA-UXB70 are equipped to meet diverse listening needs, providing an audio solution that is adaptable and high-performance.

In summary, the JVC SP-UXB70 and CA-UXB70 stand out as excellent choices for anyone in search of a compact, feature-rich audio system. With their powerful sound output, versatile playback options, and modern design, these systems are perfect for enhancing any audio experience, be it at home or on the go.