Horizon Fitness E500 manual E700 E800 Date & Clock Setup, E700 E800 etrak operation

Page 17

INTRODUCTION IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

ELLIPTICAL

OPERATION

CONDITIONING TROUBLESHOOTING LIMITED

GUIDELINES & MAINTENANCE WARRANTY

32

E700 - E800: DATE & CLOCK SETUP

1)Enter Setup Mode: Press and hold MANUAL and WEIGHT LOSS WORKOUTS program buttons for 3 seconds.

2)Once in setup mode, use the PROGRAM SETUP +/- KEYS to scroll through settings.

3)Use the ENTER button to confirm settings.

4)Settings include: MONTH, DAY, YEAR, HOUR, MINUTE, and AM/PM.

5)Review Settings: You can review your settings at any time while in Setup Mode. Use the ENTER button to scroll through settings.

6)Exit Setup Mode: To confirm the Date and Time, press and hold ENTER for 5 seconds.

7)To Reset: Simply reenter Setup Mode and adjust Date and Time to the correct setting.

E700 - E800: etrak™ operation

SETUP: To activate eTRAK™ a user MUST be chosen before the program begins. To select a user, simply press the User 1 or User 2 button. To deselect a user, press User button again. All accumulated data specifically relates to the user that is chosen.

Note: If no user is selected and clock and date are not set, no data will be tracked. To set clock and date see above.

RESET: Reset all recorded information for User 1 or User 2 by selecting the user and then holding down the user button for 10 seconds. Note: This step is permanent and will delete ALL previously accumulated data for the chosen user.

ACCUMULATED DATA: Once a USER is chosen, eTRAK™ is activated and you can scroll through your accumulated data in multiple formats by pressing the eTRAK™ button. A workout is saved when: the program ends, the console is paused and not resumed within 5 minutes, or the Stop button is held to reset the console.

1)CURRENT WORKOUT: The console automatically defaults to Current Workout, displaying your progress in real time.

2)LAST WORKOUT: This option allows you to view your accumulated data from your last workout. The Current Workout becomes the Last Workout once a program has ended or the console has been reset. The following information will be shown in each display window:

SPEED - Average speed and average resistance. TIME - Total time of last workout.

DISTANCE - Total distance of last workout.

CALORIES - Total calories burned during last workout.

Note: Average speed and average resistance level will display alternately every three seconds.

3)WEEKLY GOAL: This option allows you to set and view your weekly time or distance goal based on a calendar week and will run concurrently with the WEEKLY TOTAL function. The following information will be shown in each display window:

CLOCK/DATE

“GOAL”- Indicates the weekly goal you set.

“LEFT” - Indicates the time or distance you have left to complete to meet your weekly goal. “GOAL DONE” - Indicates the goal has been completed.

TIME or DISTANCE – The total time or distance goal you selected and the time or distance you have left to complete to meet your weekly goal.

Note:

1.The “GOAL” and “LEFT” will display alternately every 3 seconds.

2.If the date and clock are not set and/or a weekly goal is not set, WEEKLY GOAL will display zeros.

3.The Weekly Goal will reset at the end of each week and will have to be set again using the Weekly Goal Setup instructions.

4)WEEKLY TOTAL: View your accumulated data from the last Sunday to the present day. Note: This data is based on week to date NOT the previous seven days. For instance, if you have not used the machine since Sunday, the console will read zeros. The following information will be shown in each display window:

SPEED - Average speed and average resistance of weekly workouts. TIME - Total time of weekly workout.

DISTANCE - Total distance of weekly workouts. CALORIES - Average weekly calories burned.

Note: Average speed and average resistance level will display alternately every three seconds. If the Date and Clock are not set, Weekly Total will default to the Last Workout data.

5)MONTHLY TOTAL: View your accumulated data from the first day of the month to the present day. Note: This data is based on month to date NOT the previous thirty days. For instance, if you have not used the machine since the first of the month, the console will read zeros. The following information will be shown in each display window:

SPEED - Average speed and average resistance of monthly workouts. TIME - Total time of monthly workout.

DISTANCE - Total distance of monthly workouts. CALORIES - Average monthly calories burned.

Note: Average speed and average resistance level will display alternately every three seconds. If the Date and Clock are not set, Monthly Total will default to equal the Last Workout data.

6)LIFETIME TOTAL: This option allows you to view the total accumulated data from your first workout to your last saved workout. The following information will be shown in each display window:

SPEED - Average speed and average resistance.

TIME - Total accumulated time. Note: If time is greater than 59:59, the time will no longer display minutes and will display hours only.

DISTANCE - Total accumulated distance. CALORIES - Average calories burned.

Note: Average speed and average resistance level will display alternately every three seconds.

33

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

ELLIPTICAL OPERATION

LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES

E500-E800_Rev.1.7.indd 32-33

4/27/07 1:44:09 PM

Page 16 Page 18
Image 17
Page 16 Page 18
Contents L I P T I C a L USER’S Guide T R O D U C T I O N Table of ContentsUnpacking Important PrecautionsAssembly Tools Included Parts Included S E M B LY StepS E M B LY Step PRE-ATTACHED SET Screws Link ARM Pedal ARM S E M B LY Step YOU’RE Finished Before YOU BeginLocation of the Elliptical E500 E700 E800Elliptical Operation PowerMoving Foot PositioningConsole Operation P2 P3 Weight Loss WorkoutsQuick Start Program Pr o f i l e sE500 Console Operation Program Weight Loss WorkoutsProgram Profiles Program ManualO G R a M Cardio Stride Workouts O G R a M Power Stride WorkoutsE700 E800 Console Operation P2 P4 Weight Loss WorkoutsE700 E800 P2 E700 E800 P3E700 E800 P8 O G R a M MY Workout 1 & 2 P11 P12E700 E800 P9 E700 E800 P10E500 etrak operation Program InformationUs i n g et r a k Performance tracker E700 E800 etrak operation E700 E800 Date & Clock SetupConditioning Guidelines E700 E800 Weekly Goal SetupHeart Rate Us i n g SPEAKER/MP3 Audio FunctionStretch First Target Heart Rate Zone ChartStanding Calf Muscle Stretch Standing Quadriceps StretchKeeping AN Exercise Diary TroubleshootingAchieving Your Fitness Goals Common Product Questions Heart Rate TroubleshootingI N T E N a N C E Limited Home USE Warranty Customer Tech Support

E700, E500, E800 specifications

Horizon Fitness has made a name for itself in the world of home fitness equipment, and their E500, E700, and E800 elliptical trainers exemplify the brand's commitment to quality, innovation, and user-centric design. These machines cater to a variety of fitness levels and user preferences, each offering unique features and technologies that enhance the workout experience.

The Horizon E500 is designed for those who appreciate a straightforward yet effective workout routine. A standout feature is its adjustable stride length, which ranges from 18 to 20 inches, allowing users of different heights to find their optimal stride for comfort and efficiency. It also comes equipped with a lightweight frame, making it easier to move and store. The E500 is integrated with Bluetooth technology that allows for seamless connectivity with fitness apps, making tracking performance and progress convenient. The machine includes a variety of pre-set programs to keep workouts engaging and challenging.

Moving up in the lineup, the Horizon E700 introduces several advanced features tailored for serious fitness enthusiasts. This model boasts a heavy-duty frame and provides a longer stride length, accommodating users who prefer a more extensive range of motion. One of its most notable characteristics is the adjustable incline feature, which allows users to modify the resistance and target various muscle groups effectively. Additionally, the E700 is equipped with an interactive touchscreen console, providing an enhanced user experience with clear visuals and easy navigation through the various workout programs and tracking metrics.

At the top of the range is the Horizon E800, which delivers a premium experience with cutting-edge technology and ergonomics. The E800 includes all the features of the E700 but with further enhancements such as a larger LCD display that shows key metrics like heart rate, calories burned, and workout time in real-time. This model offers an exceptionally smooth and quiet operation, thanks to its advanced drive system. Furthermore, the E800 supports advanced connectivity options, allowing users to sync with popular fitness apps such as Zwift for interactive training sessions and competitions.

In summary, Horizon Fitness' E500, E700, and E800 elliptical trainers cater to different fitness needs while sharing a commitment to quality and innovation. With features ranging from adjustable stride lengths to advanced Bluetooth connectivity, these ellipticals provide versatile options for all users seeking an effective cardiovascular workout in the comfort of their home.
Top Page Image Contents