Horizon Fitness E901 manual Slide PRE-ATTACHED Spacer into Lower Link ARM, Lower Handlebar

RIONINT

ODUCT

R

IREP

PO

ONS

IM

CAUT

TANT

BLYEM

ASS

E

RE EFO

B

BINYOU G

ICAL

IPT

ER

LLE

OPION

AT

ING

I E

IN

TION

LE ID

A S S E M B LY STEP 6
	RIGHT LOWER LINK ARM
	U-BRACKET
	SPLIT TEFLON WASHERS (I)
SPACER (H)	FLAT WASHER (J)
CONNECTING TUBE	BOLT (K)
RIGHT PEDAL ARM

AOpen HARDWARE BAG FOR STEP 6.

BAlign the U-BRACKET on the RIGHT LOWER LINK ARM with the CONNECTING TUBE on the RIGHT PEDAL ARM.

CSlide the SPACER (H) through the U-BRACKETand the CONNECTING TUBE so that it can no longer rotate.

DInsert 2 SPLIT TEFLON WASHERS (I) between the CONNECTING TUBE and the U-BRACKET.

A S S E M B LY STEP 7
	LOWER LINK ARM	LOWER HANDLEBAR
	SPACER RINGS
		SPACER
	LOWER HANDLEBAR
PRE-ATTACHED NUT, FLAT WASHER AND BOLT
LOWER LINK ARM	PRE-ATTACHED SPACER RINGS AND SPACER

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

ELLIPTICAL OPERATION

GU
COND
E S
E E
R
T I
I NANCNT&A
NG
M
OUBL
SHOOT
DET
RR
L
WA
IMI
ANTY
	12

eSecure the joint with a FLAT WASHER (J) and BOLT (K). F Repeat on the other side.

HARDWARE BAG FOR STEP 6 CONTENTS :
		SPACER (H)
		72 mm axis
		Qty: 2
SPLIT TEFLON	FLAT WASHER (J)	BOLT (K)
WASHER (I)	35 mm	15 mm
28 mm	Qty: 2	Qty: 2
Qty: 4

NOTE: There is no hardware bag for this step

ARemove PRE-ATTACHED SPACER, SPACER RINGS, BOLTS, FLAT WASHERS and NUTS from LOWER LINK ARM.

BSlide PRE-ATTACHED SPACER into LOWER LINK ARM.

CPlace 2 PRE-ATTACHED SPACER RINGS on both sides of PRE-ATTACHED SPACER. While holding PRE-ATTACHED SPACER RINGS, slide LOWER LINK ARM into bottom end of

LOWER HANDLEBAR.

DInsert 1 PRE-ATTACHED BOLT into LOWER HANDLEBAR and secure using 1 PRE-ATTACHED WASHER and 1 PRE-ATTACHED NUT.

eRepeat on other side.

Confirm that the

LOWER HANDLEBAR

and the LOWER LINK ARM are marked R. The left side is marked L.

13

LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES

E901_Rev.1.7.indd 12-13 9/10/08 11:07:03 AM