INTRODUCTION IMPORTANT PRECAUTIONS
ASSEMBLY
BEFORE YOU BEGIN
CONSOLE
GRIP PULSE
WATER BOTTLE HOLDER
TOP COVER
PEDAL ARM
WHEEL COVER
UPPER HANDLEBAR
HANDLEBAR COVER
CONSOLE MAST
MAIN FRAME
LOWER HANDLEBAR
LOWER LINK ARM
PIVOTING FOOT PAD
A S S E M B LY STEP 1 |
|
MAIN FRAME | BOLT (A) |
| SPRING WASHER (B) |
| FLAT WASHER (C) |
| FRONT STABILIZER TUBE |
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
CONDITIONING TROUBLESHOOTING GUIDELINES & MAINTENANCE
TOOLS INCLUDED
c5mm Allen Wrench
c6mm Allen Wrench
cPhillips Screw Driver
c13/15mm Flat Wrench
PARTS INCLUDED
c 1 Console | c 2 Handlebar Cover Sets | ||
c 1 Console Mast | c 2 Top Covers | ||
c 1 | Front Stabilizer Tube | c 1 | HORIZON FITNESS |
c 2 | Upper Handlebars | ||
c 2 | Lower Handlebars | c 1 | Water Bottle Holder |
c 2 | Lower Link / Pivoting Foot Pads | c 4 | Hardware Bags |
AOpen HARDWARE BAG FOR STEP 1.
BAttach the FRONT STABILIZER TUBE to the MAIN FRAME using 2 BOLTS (A), 2 SPRING WASHERS (B) and 2 FLAT WASHERS (C).
HARDWARE BAG FOR STEP 1 CONTENTS :
BOLT (A) | SPRING WASHER (B) | FLAT WASHER (C) |
20 mm | 18 mm | 20 mm |
Qty: 2 | Qty: 2 | Qty: 2 |
ELLIPTICAL OPERATION
TROUBLESHOOTING CONDITIONING MAINTENANCE GUIDELINES
HORIZON
WARRANTY
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.horizonfitness.com
HORIZON WARRANTY &
E401_Rev.1.5.indd | 2/29/08 10:05:29 AM |