Chapter 1
Assembling the Exercise Bike
Important: The instructions in the following procedures are described from the perspective of a person standing directly in front of the equipment (that is, on the opposite side of the control console from a person using the equipment). These descriptions may not match the names of certain parts in the parts list, because such parts are named relative to the back of the equipment.
To prepare the exercise bike for assembly:
Open the box and assemble the components in the sequence presented in this guide.
Assemble and operate your equipment on a hard, level surface in the area intended for use.
Important: Do not grasp any plastic parts of the unit while lifting or moving the unit. The plastic parts are
Assemble the equipment according to the guidelines in this manual to ensure you do not void the Precor Limited Warranty.
Important: Any damage caused during installation is not covered by the Precor Limited Warranty.
Attach all fasteners and partially tighten them. Do not fully tighten fasteners until instructed to do so.
WARNING You will need assistance to assemble this unit. DO NOT attempt assembly by yourself.