ProForm PFTL99602 user manual Measure your heart rate, if desired

Page 18

If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However, when the next “chirp” is heard, the speed and/or incline will change to the next settings of the CD or video program.

To stop the walking belt at any time, press the Stop button on the console. The Time/Segment Time display will begin to flash. To restart the pro- gram, press the Start button or the Speed + but- ton. After a moment, the walking belt will begin to move at 1.0 mph. When the next “chirp” is heard, the speed and incline will change to the next settings of the CD or video program. The program can also be stopped by pressing the Stop button on your CD player or VCR.

When the CD or video program is completed, the walking belt will stop and the Time/Segment Time display will begin to flash. Note: To use another CD or video program, press the Stop button or re- move the key and go to step 1 on page 17.

Note: If the speed or incline of the treadmill does not change when a “chirp” is heard:

Make sure that the iFIT.com indicator is lit and that the Time/Segment Time display is not flashing. If the Time/Segment Time display is flashing, press the Start button or the Speed + button on the console.

Adjust the volume of your CD player or VCR. If the volume is too high or too low, the con- sole may not detect the program signals.

Make sure that the audio cable is properly connected, that it is fully plugged in, and that it is not wrapped around a power cord.

If you are using your portable CD player and the CD skips, set the CD player on the floor or another flat surface instead of on the console.

Follow your progress with the LED track and

5 the displays.

See step 5 on page 10.

6 Measure your heart rate, if desired.

See step 6 on page 11.

When the program is completed, remove the

7 key from the console.

See step 6 on page 13.

CAUTION: Always remove iFIT.com CDs and videocassettes from your CD player or VCR when you are finished using them.

18

Image 18
Contents QUESTIONS? Model No. PFTL99602 Serial NoCustomer HOT Line Table of Contents Important Precautions Page Before YOU Begin Left Side Right SideAssembly Driver and rubber malletPage Operation and Adjustment HOW to Plug in the Power CordPerformant Lubetm Walking Belt Console Diagram Features of the ConsoleMore information HOW to Turn on the Power HOW to USE the Manual ModeMeasure your heart rate, if desired HOW to USE Personal Trainer Programs Select one of the personal trainer programsFollow your progress with the displays When the program is completed, remove Key from the consoleHOW to USE Heart Rate Programs Put on the chest pulse sensorEnter your age HOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your ComputerInsert the key into the console HOW to Connect Your VCRAudio Adapter Cable PressVCR. the Play button on your CD player orMeasure your heart rate, if desired Return to the treadmill and stand on the foot HOW to USE Programs Directly from OUR WEB SiteFollow the on-line instructions to start Program Follow your progress with the LED track DisplaysInformation MODE/DEMO Mode HOW to Adjust the Cushioning SystemOptional Chest Pulse Sensor HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useTop Problem The thumb pulse sensor does not function properly Problem The walking belt slows when walked onWorkout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Page R0804A Key Qty DescriptionExploded DRAWING-Model No. PFTL99602 106 102 103 108 107 104 100 121 105 119 117 115 116 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT