2. With the help of a second person, carefully tip | 2 |
|
|
the treadmill onto its right side. |
|
| |
| 14 |
| |
|
| 84 | |
Insert the other Extension Leg (89) into the base |
|
| |
|
|
| |
of the Upright (84). Hold an Extension Leg |
|
|
|
Nut (67) in the bottom of the Extension Leg, and |
|
| 92 |
thread a 2 1/4" Extension Leg Bolt (92) into the | 44 |
| |
top of the Extension Leg. Next, thread a 2 1/2" |
|
| 89 |
Extension Leg Bolt (65) into the bottom of the |
|
| |
|
|
| |
Extension Leg. Firmly tighten the Extension |
|
|
|
Leg Bolts. |
|
|
|
Slide the other Front Endcap (44) onto the base |
| 65 | 67 |
|
| ||
|
|
| |
of the Upright (84). Partially tighten a Front |
|
|
|
Endcap Screw (14) into the Front Endcap and |
|
|
|
the base. |
|
|
|
3. Attach two Base Pads (82) to the base of the | 3 |
|
|
Upright (84) with two 1" Tek Screws (83). |
|
| |
|
|
| |
| 83 | 82 |
|
|
|
| |
|
| 84 |
|
| 83 | 82 |
|
|
|
| |
4. With the help of a second person, carefully raise | 4 |
|
|
the treadmill to a vertical position. |
|
| |
|
|
| |
Insert the Handrails (20) into the tubes at the top |
|
|
|
of the Upright (84). Make sure that the Handrails |
|
|
|
are turned so that the Handrail Bolts (64) can be |
|
|
|
threaded into the Handrails (see the inset draw- | 20 |
| |
ing). Start both Handrail Bolts before tightening |
| ||
|
|
| |
them. |
|
|
|
See steps 1 and 2. Fully tighten the two Front |
|
| 64 |
|
| 84 | |
Endcap Screws (14). |
|
| |
|
|
| |
|
|
| 20 |
|
| 20 | 64 |
| 7 |
|
|