HOW TO USE HEART RATE PROGRAMS
CAUTION: If you have heart prob- lems, or if you are over 60 years of age and have been inactive, do not use the heart rate programs. If you are taking medication regu- larly, consult your physician to find whether the medication will affect your exercise heart rate.
Put on the optional chest pulse sensor (see
1 page 23).
You must wear the optional chest pulse sensor to use a heart rate program.
2 Insert the key fully into the console.
See HOW TO TURN ON THE POWER on page 12.
3 Select a heart rate program.
When the key is in- serted, the manual mode will be selected. To select a heart rate
program, press the left Select Program button
repeatedly until one of the two heart rate program indicators lights.
The diagrams beside the heart rate program indi- cators show how the target heart rate will change during the programs. During the 85% Max. pro- gram, your heart rate will reach approximately
85% of your estimated maximum heart rate; dur- ing the Self Select program, your heart rate will re- main near a level that you select.
Note: Your estimated maximum heart rate is de- termined by subtracting your age from 220. For example, if you are 30 years old, your estimated maximum heart rate is 190 beats per minute (220 – 30 = 190).
During heart rate pro- grams, the matrix will show a moving graphic that represents your heart rate. Each time a heartbeat is detected, an additional peak will appear.
4 Enter your age.
When a heart rate pro-
gram is selected, the word “AGE” and the cur- rent age setting will flash
in the Incline/Heart Rate display. If you have al-
ready entered your age, simply press the Enter button. If you have not entered your age, press the + and – buttons beside the Enter button to enter your age. Then, press the Enter button.
5 Enter a maximum speed.
After you have entered
your age, the letters “SPd” and the maximum speed setting of the pro- gram will flash in the Incline/Heart Rate dis-
play. If desired, press the + and – buttons beside the Enter button to change the maximum speed setting. When the desired setting is shown, press the Enter button.
If the 85% Max. program is selected, go to step
7.If the Self Select program is selected, go to step 6.
6 Enter a target heart rate.
After you have entered a
maximum speed setting, the letters “PLS” and the target heart rate setting for the program will flash in the Incline/Heart Rate
display. If desired, press the + and – buttons be- side the Enter button to change the target heart rate setting. When the desired setting is shown, press the Enter button.
16