5.Identify the Left and Right Handrails (68, 81); the curved edges of the Handrails should be on the outside (see the end views of the Handrails in the inset drawing).
Slide the Right Handrail (81) onto the Right Handrail Bracket (113), and press the lip on the front of the Right Handrail under the Console Base (85). (Note: It may be helpful to tip the Right Handrail and to tap it with a rub- ber mallet to correctly position it.) Tighten two 3/4” Screws (6) and a 1” Screw (117) into the Right Handrail in the locations shown. Note: It may be necessary to move the lower end of the Right Handrail slightly to align the lower screw hole.
Attach the Left Handrail (68) in the same way.
6.Attach each Upper Body Arm Holder (77) to an Upright (82) with two 3/4” Screws (6).
5 |
|
|
|
68 |
|
|
|
|
| 117 |
|
| 6 | Lip | 85 |
Curved Edge | 81 |
| |
|
| ||
|
|
| 113 |
|
| 6 |
|
(81) | (68) |
| 117 |
6 |
|
|
|
77
82 
77
6
82
6
7.Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the walking belt (see page 28). To protect the floor or carpet, place a mat under the treadmill.
8