ProForm PFTL611040 HOW to Fold and Move the Treadmill, HOW to Fold the Treadmill for Storage

Page 23

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the

lowest position. If this is not done, the treadmill may be per- manently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

1.Hold the treadmill with your hands in the locations shown by the arrow at the right. To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your legs rather than your back. Raise the treadmill about halfway to the vertical position.

2.Move your right hand to the position shown and hold the treadmill firmly. Using your left thumb, press the storage latch to the left. Raise the treadmill until the storage latch closes over the catch. Make sure that the storage latch is fully engaged over the catch.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sun- light. Do not leave the treadmill in the storage position in temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure that the frame is se- curely held by the storage latch.

1.Hold the upper ends of the handrails. Place one foot on a front wheel.

2.Tilt the treadmill back until it rolls freely on the front wheels. Carefully move the treadmill to the desired location. To re- duce the risk of injury, use extreme caution while mov- ing the treadmill. Do not move the treadmill over an un- even surface.

3.Place one foot on the base, and carefully lower the treadmill until it is resting in the storage position.

Engaged

Storage

Latch

Catch

Base

Front Wheels

23

Image 23
Contents Customer HOT Line QUESTIONS?Model No. PFTL611040 Serial No Table of Contents Important Precautions Page Back Before YOU BeginRight Side Make sure that the power cord is unplugged AssemblyTek Screw, without the Base Pad, first Page Do not overtighten the Screws PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerWhen you are finished using the treadmill Ting. The incline must be at the lowest settingWhen the treadmill is raised to the storage po Demo modeSelect a speed program HOW to USE a Speed ProgramHOW to USE a Pulse Program Hold the pulse sensor Enter a maximum speed settingHOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your Computer Adapter Audio Cable HOW to Connect Your VCRPressVCR. the Play button on your CD player or Follow your progress with the matrix Displays HOW to USE Programs Directly from OUR WEB SiteFollow the on-line instructions to start Program Return to the treadmill and stand on the footInformation MODE/DEMO Mode HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Top TroubleshootingProblem The power turns off during use Problem The walking belt slows when walked on Exercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesRemove this Exploded Drawing and Part List from the Manual Key Qty Description Part LIST-Model No. PFTL611040R0105A Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty