ProForm PFTL611040 user manual HOW to Connect Your VCR, Adapter Audio Cable

HOW TO CONNECT YOUR VCR

Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 18.

A. Plug one end of the audio cable into the jack be- neath the console. Plug the other end of the cable into the included adapter. Plug the adapter into the AUDIO OUT jack on your VCR.

A	ANT. IN
VIDEO AUDIO
IN
	RF OUT
	CH
3	4
OUT
AUDIO OUT
RIGHT
LEFT
Adapter
Audio
Cable

B. Plug one end of the audio cable into the jack be- neath the console. Plug the other end of the cable into the included adapter. Plug the adapter into an RCA Y-adapter (available at electronics stores). Next, remove the wire that is currently plugged into the AUDIO OUT jack on your VCR and plug the wire into the unused side of the Y-adapter. Plug the Y-adapter into the AUDIO OUT jack on your VCR.

B
		ANT. IN
	VIDEO AUDIO
	IN
		RF OUT
		CH
	3	4
	OUT
RCA Y-adapter
Audio	Adapter
Cable
Wire removed from
AUDIO OUT jack

19