ProForm PFTL591040 user manual Bolts, tighten them

Page 9

8.With the help of another person, hold the console as- sembly near the Right Upright (119) and the left Upright (not shown).

Connect the Wire Harness (118) to the wire harness in the console assembly. Make sure to connect the con- nectors properly (see the inset drawing); the con- nectors should slide together easily and snap into place. If the connectors do not slide together easily and snap into place, turn one connector and try again. IF

THE CONNECTORS ARE NOT CONNECTED PROP- ERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Insert the excess wire harness back into the Right Handrail (120).

Set the console assembly on the Right Upright (119) and the Left Upright (not shown). Thread two 1/4” x 1” Bolts (117) with 1/4” Star Washers (93) into each side of the console assembly. After you have started all four

Bolts, tighten them.

9.Lower the Uprights (111, 119) until the Handrails (108, 120) are touching the floor. Note: If necessary, pull out on the latch knob (A) so that the pin does not hit the Frame (21).

See the lower drawing. Position the Uprights (111, 119) so that the treadmill Frame (21) is centered between the Uprights.

Firmly tighten the four Upright Bolts (133). Then, raise the Uprights (111, 119) back to the vertical position. Note: If necessary, pull out on the latch knob (A) so that the pin does not hit the Frame (21).

10.Attach the Left Upper Body Arm (95), which is labeled with a sticker, to the Left Upright (111) with two 1/4” x

3 1/2” Bolts (123), two Washers (122), and two 1/4” Star Washers (93) as shown. Note: Make sure that the Left Upper Body Arm is on the correct side of the handgrip pulse sensor (see the drawing on page 5).

Attach the Right Upper Body Arm (not shown) to the Right Upright (not shown) in the same way.

8

Console

Assembly

118

Right Handrail

 

120

93

 

 

 

118

117

 

 

119

9

 

 

 

111, 119

A

133

 

21

 

108, 120

 

119

21

111

 

 

10

 

 

 

111

95

 

 

 

123

 

 

 

93

123

 

 

11.Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the walking belt (see page 27). To protect the floor or carpet, place a mat under the treadmill. If there is a sheet of clear plastic on a decal, remove the plastic.

9

Image 9
Contents QUESTIONS? Model No. PFTL591040 Serial NoCustomer HOT Line Table of Contents Important Precautions Page Before YOU Begin For your benefit, read this manual carefully beforeBack Right Side Assembly Page Page Bolts, tighten them HOW to Plug in the Power Cord Treadmill OperationPRE-LUBRICATED Walking Belt Features of the Console HOW to USE the Manual Mode HOW to Turn on the PowerCalories/Pulse Distance/Incline disTime/Pace display Measure your heart rate if desiredSelect one of the preset programs HOW to USE Preset ProgramsFollow your progress with the displays Select a heart rate program HOW to USE Heart Rate ProgramsEnter your age Enter a maximum speedFollow your progress with the displays HOW to Connect Your Portable Stereo HOW to Connect Your Computer HOW to Connect Your Home StereoAudio Adapter Cable HOW to Connect Your VCRInsert the key into the console PressVCR. the Play button on your CD player orMeasure your heart rate if desired Follow the on-line instructions to start Program HOW to USE Programs Directly from OUR WEB SiteReturn to the treadmill and stand on the foot Follow your progress with the matrix DisplaysOptional Chest Pulse Sensor Information MODE/DEMO ModeHOW to Fold and Move the Treadmill HOW to USE the Upper Body ArmsHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE HOW to Move the TreadmillProblem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked onProblem One of the upper body arms squeaks during use Exercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencyQty Description R0105AQty Exploded DRAWING-Model No. PFTL591040 Model HOW to Order Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT

PFTL591040 specifications

The ProForm PFTL591040 is a standout treadmill designed to meet the needs of fitness enthusiasts ranging from beginners to seasoned athletes. This machine combines advanced features, smart technologies, and user-friendly characteristics, making it an excellent addition to any home gym.

One of the main features of the PFTL591040 is its powerful 2.5 CHP motor, which offers reliable performance for intense workouts without compromising durability. The motor supports a top speed of 10 mph, allowing users to vary their pace according to their fitness goals. Whether you prefer brisk walking, jogging, or intense running sessions, this treadmill can accommodate your preferred intensity.

Another significant aspect of the ProForm PFTL591040 is its spacious 20" x 55" running surface. This generous area provides ample space for comfortable and safe workouts, reducing the risk of missteps. Additionally, the treadmill features adjustable incline settings, reaching up to 10%, which helps diversify workout routines and engage different muscle groups for better overall fitness results.

The machine is also equipped with ProForm's innovative iFit technology, enabling users to access a wide range of on-demand workouts led by certified personal trainers. With iFit, you can seamlessly track your workout history, set fitness goals, and even run alongside global destinations thanks to Google Maps integration. This feature not only keeps your workout routines fresh and engaging but also adds an interactive element that many fitness enthusiasts appreciate.

To enhance user comfort, the ProForm PFTL591040 includes a cushioning system that reduces joint impact during activity, providing a more enjoyable running experience. The SpaceSaver design also adds convenience, allowing the treadmill to be folded vertically for easy storage when not in use.

Other attractive characteristics of the PFTL591040 include a built-in sound system and quick access controls for speed and incline adjustments. The clear LCD display provides real-time workout stats such as time, distance, speed, and calories burned, ensuring users remain informed and motivated throughout their workouts.

In summary, the ProForm PFTL591040 is a versatile treadmill that combines performance, innovative features, and user-friendly designs. With its powerful motor, spacious running surface, iFit technology, and comfortable cushioning, it stands out as an exceptional option for anyone looking to enhance their fitness regimen. Whether you are starting your fitness journey or looking to maintain your progress, this treadmill is built to support your goals.