ProForm 831.293202 user manual Troubleshooting, Solution, Power Cord

Page 22

TROUBLESHOOTING

Most treadmill problems can be solved by following the simple steps below. Find the symptom that

applies, and follow the steps listed. If further assistance is needed, call toll-free 1-800-4-MY-HOME® (1-800-469-4663).

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 8). Use only a single-outlet surge suppressor that meets all of the specifications described on page 8. Important: The treadmill is not compatible with GFCI-equipped outlets.

b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.

c.Check the on/off circuit breaker located on the treadmill frame near the power cord. If the switch protrudes as shown, the on/off circuit breaker has tripped. To reset the on/off circuit breaker, wait for five minutes and then press the switch back in.

c

Tripped

Reset

PROBLEM: The power turns off during use

SOLUTION: a. Check the on/off circuit breaker (see the drawing above). If the on/off circuit breaker has tripped, wait for five minutes and then press the switch back in.

b.Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five minutes, and then plug it back in.

c.Remove the key from the console. Reinsert the key fully into the console.

 

d. If the treadmill still will not run, please call toll-free 1-800-4-MY-HOME

® (1-800-469-4663).

PROBLEM: The incline of the treadmill does not change correctly

 

SOLUTION:

a. With the key in the console, press one of the Incline buttons.

While the incline is changing, re-

 

move the key.

After a few seconds, re-insert the key. The treadmill will automatically rise to the

 

maximum incline level and then return to the minimum level. This will recalibrate the incline system.

PROBLEM: The console is too high or too low

SOLUTION: a. See assembly step 7 on page 7.

PROBLEM: The treadmill rocks during use

SOLUTION: a. See HOW TO LEVEL THE TREADMILL on page 20.

PROBLEM: The displays of the console do not function properly

SOLUTION:

a. Remove the key from the console and

UNPLUG THE

 

POWER CORD.

With the help of a second person,

carefully tip the Upright Base (97) down as shown. Remove the five Hood Screws (44). Note: A phillips screwdriver with at least a 5” shaft is required.

a

44

 

44

 

97

 

44

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Model No Serial No Serial Number DecalTable of Contents Important PrecautionsNever insert any object into any opening Never leave the treadmill unattended while itMove the Treadmill on Decals shown have been placed on your treadmill. If aRight Side Using the treadmillBefore YOU Begin BackMake sure that the power cord is unplugged AssemblyPart is missing, call toll-free Place Uprights. Retighten all four Upright Bolts Console 107 as shownThis product must be grounded.If it should malfunc HOW to Plug in the Power CordPerformant Lube Grounded Outlet BoxCDs, call toll-free Features of the ConsolePrograms HOW to USE the Manual Mode Distance/Incline dis Calories/PulseDisplay Next, stand onPress the Start button or the Speed HOW to USE Preset ProgramsSelect one of the preset programs Start the programFollow your progress with the displays From the console When the program has endedPut it in a safe place Turn on the fans if desired Enter your age and a maximum speed settingFrom the console Press the Play/Pause button to start Program Next settings of the CD programButton or the Speed Button on the console HOW to Play Music CD’S UAL Mode on page 10. Note Due to the natureHOW to Connect the Treadmill to Your Computer HOW to Connect the Treadmill to Your VCR or ComputerCable Adapter Wire removed from Audio Adapter CablePress the Play button on your VCR Mph. When the next chirp is heard,Does not change when a chirp is heard Treadmill is about to changeGo to your computer and start an internet Connection HOW to USE Programs Directly from OUR WEB SiteNext settings of the program Lect a programButtons on the console will not operate Information MODE/DEMO ModeHOW to Level the Treadmill So the display is blankHOW to Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Lower the Treadmill for USE Solution TroubleshootingPower Cord If the walking Problem The walking belt slows when walked onUnplug Power Cord Belt has shifted to the leftWorkout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Washer Description Key No. QtyQty Part Identification Chart Key No. Qty DescriptionR0803A 831.293202DRAWING-Model 108 831 Sears, Roebuck and Co., Dept WA, Hoffman Estates, IL Full ONE Year WarrantyPart No R0803A
Top Page Image Contents