JVC RX-DV5SL Connecting Audio/Video Components, For video connections, For audio connections

English

Getting Started

Connecting Audio/Video Components TV connection

Turn off all the components and the unit before connection.

■About connecting cords

For video connections

The S-video cords and the component video cord are not supplied with this unit. Use the cords supplied with the other components or purchase them at your dealer.

AComposite video cord (supplied)

Yellow

BS-video cord (not supplied)

CComponent video cord (not supplied)

Green

Blue

Red

•You can use composite video cord ( A ) and/or S-video cord ( B ) for connecting DBS tuner and VCR to this unit.

•You can use component video cord ( C ) in addition to A and B for connecting your TV to this unit.

•By using B or C , you can get a better picture quality—in the order: A < B < C .

•To view the picture from DBS tuner or VCR on your TV, connect your TV to this unit using the same type of cord for connecting DBS tuner or VCR to this unit.

•To view the picture from the built-in DVD player, connect the TV to this unit using A , B , and/or C , then register the video output mode correctly (see “Video output mode” on page 22).

•To enjoy the progressive video picture, connect the TV compatible with the progressive video input using C , then change the scanning mode correctly (see “Changing the Scanning Mode” on page 14).

For audio connections

Connect the external components to this unit with the audio cords.

Use the cord supplied with the other components or purchase them at your dealer.

A

B

C

Digital coaxial cord (not supplied)

Optical digital cord (not supplied)

Audio cord (not supplied)

•When the unit is shipped from the factory, the DIGITAL IN terminals are set for use with the following components:

–DIGITAL 1 (coaxial): For DBS tuner

–DIGITAL 2 (optical): For TV

•If you connect CDR, change the digital input (DIGITAL IN) terminal setting (see “Digital input (DIGITAL IN) terminals” on page 21) and the source name (see “Changing the Source Name” on page 12) correctly.

•Select the digital input mode correctly (see “Selecting the Analog or Digital Input Mode” on page 13).

White

Red

7