JVC RX-DV5SL manual Maintenance, General Notes, Handling Discs, Cleaning Discs, Cleaning the Unit

Page 69

Maintenance

To get the best performance of the system, keep your discs and mechanism clean.

English

General Notes

In general, you will have the best performance by keeping your discs and mechanism clean.

Store discs in their cases, and keep them in cabinets or on shelves.

Handling Discs

Remove the disc from its case by holding it at the edge while pressing the center hole lightly.

Do not touch the shiny surface of the disc, or bend the disc.

Put the disc back in its case after use to prevent warping.

Be careful not to scratch the surface of the disc when placing it back in its case.

Avoid exposure to direct sunlight, temperature extremes, and moisture.

Cleaning Discs

Wipe the disc with a soft cloth in a straight line from center to edge.

DO NOT use any solvent—such as conventional record cleaner, spray, thinner, or benzine—to clean the disc.

Cleaning the Unit

Stains on the unit

Should be wiped off with a soft cloth. If the unit is heavily stained, wipe it with a cloth soaked in water-diluted neutral detergent and wrung well, then wipe clean with a dry cloth.

Since the unit may deteriorate in quality, become damaged or get its paint peeled off, be careful about the following.

DO NOT wipe it with a hard cloth.

DO NOT wipe it strong.

DO NOT wipe it with thinner or benzine.

DO NOT apply any volatile substances such as insecticides to it.

DO NOT allow any rubber or plastic to remain in contact with it for a long time.

66

Image 69
Contents RX-DV5SL Mises en garde, précautions et indications diverses English Français Table of Contents Parts Identification Adjust button 23Front Panel DisplayParts Identification Remote ControlBefore Installation Putting Batteries in the Remote Control Checking the Supplied AccessoriesGetting Started Getting Started Connecting the FM and AM AntennasAM antenna connection FM antenna connectionConnecting the subwoofer speaker Connecting the SpeakersConnecting the front, center, and rear speakers Speaker Layout DiagramAbout connecting cords Connecting Audio/Video ComponentsFor video connections For audio connectionsAudio connections Video connectionsGreen WhiteDBS tuner connection VCR connectionVCR WhiteCassette deck/CD recorder connection Digital connectionCD recorder Adjust the Volume Turn On the PowerBasic Operations Select the Source to PlayChanging the Source Name Turning Off the Power With the Sleep TimerOn the remote control Input modeWhen DVD is selected as the source, you can also Basic OperationsChanging the Scanning Mode Attenuating the Input SignalActivating the Recording Mode Input ATT indicatorOpen the Disc Tray Basic DVD Player OperationsLoad a Disc Start PlaybackTurn Off the Power into Standby Select Surround ModeActivate Realistic Sound Field Stop PlaybackTuner Operations Tuning into Stations Manually Using Preset TuningSelecting the FM Reception Mode Basic Settings Operating ProcedureOperation Buttons YES ¶ For subwooferSet the appropriate digital terminal setting Basic SettingsLow frequency effect attenuator-LFE Digital input Digital in terminals-DGTAuto surround-AUTO SR Video output mode-VOUT AV Compu Link Remote Control System on pages 59On the display Set the output terminal appropriatelyPress Adjust Sound AdjustmentsPress Control 3 or 2 to adjust Front speaker balance Adjustment itemsFront speaker output balance -BAL balance Adjusting sound from the remote controlTone-BASS and Treble DAP effect level-EFFECTDolby Surround Creating Realistic Sound FieldsDTS Digital Surround DAP Digital Acoustic Processor modesAll Channel Stereo Reflections from behind Early reflections Direct soundsPossible × Impossible Activating Surround Mode Creating Realistic Sound FieldsSelecting Surround Modes Adjust the sound Adjusting Surround Mode Using Remote ControlAdjust the speaker output levels as follows For using test toneDisc Information DVD Player OperationsPlayable Disc Types Discs you can play Disc TypeDisc structure Playback Control function PBCMenu-driven playback Using the On-screen Bar Contents of the on-screen bar with the pull-down menuDVD Player Operations Changing the Time Indication Basic Operation through the On-screen BarPress on Screen twice Press EnterPress TOP Menu or Menu Locating a Desired Scene from Disc MenuFrom the DVD menu From the VCD/SVCD menu with PBCPress Angle Selecting a View Angle-ANGLEPress Angle repeatedly to select the desired view angle Press and hold Angle for a few secondsPress Subtitle Changing the Languages-SUBTITLEPress Audio Press Audio repeatedly to select the desired audio languageSelecting the audio channel Press Audio repeatedly to select the desired audio channelFor VCD For SvcdUse the number buttons 0-9 to enter the time Playing from a Specified Position on a DiscLocating a desired chapter/track Chapter/Track Search Locating a desired position-Time SearchPress Digest Press cursor 5/∞/3/2 to move to the desired sceneLocating a desired scene-DIGEST Special Picture Playback Repeat steps 2 to 4 to adjust other parameters Press cursor 3 or 2 repeatedly to select VFP modeChanging the VFP setting-VFP To adjust the appearance of the pictureRepeat to program the next steps Program Playback and Random PlaybackPlaying back in the desired order Playing back tracks in random orderRepeat Playback Repeating a current title, group, chapter, or All tracksRepeating a desired part Additional Information for DVD Audio Activating Surround modeSpecial Playback for DVD Audio About indication on the front panelPress the number buttons to select a bonus group Press cursor ∞ or 5 repeatedly to select the desiredSelecting a still picture Playing back a bonus groupMP3 Disc Playback Basic OperationsLoad an MP3 disc, then press Press Repeat Operations through the MP3 Control ScreenJpeg Disc Playback Slide-show PlaybackLoad a Jpeg disc, then press Press Menu or Operations through the Jpeg Control ScreenChoice Menu Operations Operation Buttons Configuration of Choice MenuPress Choice Press Enter to finish the settingPress cursor 3 or 2 repeatedly To display Picture menu Press cursor ∞ or 5 repeatedly To move to ProgressiveChoice Menu Operations Language menuPicture menu MP3 Audio menuJpeg MAXSPK. Setting menu Select this to deactivate it Others menuRestricting Playback by Parental Lock Setting Parental LockChanging the setting of Parental Lock New setting is storedReleasing Parental Lock temporarily Country/Area codes list for Parental Lock Glossary for DVD Player TV’s Video Input 1 terminal using S-video cables AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection Connections 2 Video Cable ConnectionAutomatic Selection of TV’s Input Mode Remote Control of the TV and VCR Using This Remote ControlAutomatic Power On/Off One-Touch Video PlayOperating Audio Components Operating JVC’s Audio/Video ComponentsCD recorder Sound control section AmplifierSTANDBY/ON VCR Operating Video ComponentsREW TV/VIDEOOperating Other Manufacturers’ Equipment Changing the Preset Signal CodesRelease STANDBY/ON TV Try to operate your TV by pressingPress and hold Enter the manufacturer’s code using the number buttons 1-9Press DBS Release STANDBY/ON DBSOperating Other Manufacturers’ Equipment Using the number buttons 1-9, 0. TestEnter the manufacturer’s code Release STANDBY/ON VCRCleaning Discs MaintenanceCleaning the Unit General NotesGenaral TroubleshootingFor DVD Player For Tuner TroubleshootingFor MP3 For JpegAmplifier SpecificationsFM tuner IHF AM tunerVictor Company of JAPAN, Limited 0802NHMMDWJEM