JVC RX-DV5SL manual Troubleshooting, For Tuner, For MP3, For Jpeg

Page 72

Troubleshooting

English

7For Tuner

PROBLEM

Hard to listen to broadcast because of noise.

Continuous hiss or buzzing during FM reception.

Occasional cracking noise during FM reception.

7For MP3

POSSIBLE CAUSE

The AM loop antenna is too close to the unit.

The supplied FM antenna is not properly extended and positioned.

Incoming signal is too weak.

The station is too far away.

An incorrect antenna is used.

Antennas are not connected properly.

Ignition noise from automobiles.

SOLUTION

Change the position and direction of the AM loop antenna.

Extend the FM antenna at the best position.

Connect an outdoor FM antenna or contact your dealer.

Select a new station.

Check with your dealer to be sure you have a correct antenna.

Check connections.

Move the antenna farther from automobile traffic.

PROBLEM

A disc cannot be played.

No MP3 files except JPEG files are played.

POSSIBLE CAUSE

No MP3 files are recorded on the disc.

The disc is unplayable (such as CD- ROM).

MP3 files do not have the correct file extension—.mp3, .Mp3, .mP3, or .MP3 in their file names.

MP3 files are made at bit rate under 64 kbps.

MP3 files are not recorded in the format compliant with ISO 9660 Level 1 or 2.

The MP3/JPEG setting is set to “JPEG.”

SOLUTION

Replace the disc.

Add the file extension—.mp3, .Mp3, .mP3, or .MP3—to their file names (see page 45).

This unit cannot play back such files. Replace the disc.

Replace the disc. (Record MP3 files using a compliant application.)

When both MP3 files and JPEG files are recorded on a disc, to play MP3 files, set the MP3/JPEG setting to “MP3” (see page 52).

7 For JPEG

PROBLEM

 

POSSIBLE CAUSE

 

SOLUTION

A disc cannot be played.

 

No JPEG files are recorded on the disc.

Replace the disc.

 

 

 

 

 

 

 

The disc is unplayable (such as CD-

 

 

 

ROM).

 

 

 

 

 

 

 

 

JPEG files do not have the correct file

Add the file extension—.jpg, .jpeg, .JPG,

 

 

extension in their file names.

.JPEG or any uppercase and lowercase

 

 

 

 

combination (such as “.Jpg”)—to their file

 

 

 

 

names (see page 47).

 

 

 

 

 

 

 

JPEG files are not made with baseline

This unit cannot play back such files.

 

 

JPEG format.

Replace the disc.

 

 

 

 

 

 

 

JPEG files are not recorded in the

Replace the disc. (Record JPEG files using a

 

 

format compliant with ISO 9660 Level

compliant application.)

 

 

1 or 2.

 

 

 

 

 

 

No JPEG files except MP3 files are

 

The MP3/JPEG setting is set to “MP3.”

When both MP3 files and JPEG files are

played.

 

 

 

recorded on a disc, to play JPEG files, set

 

 

 

 

the MP3/JPEG setting to “JPEG” (see page

 

 

 

 

52).

 

 

 

 

 

69

Image 72
Contents RX-DV5SL Mises en garde, précautions et indications diverses English Français Table of Contents Adjust button 23 Parts IdentificationFront Panel DisplayRemote Control Parts IdentificationBefore Installation Putting Batteries in the Remote Control Checking the Supplied AccessoriesGetting Started Connecting the FM and AM Antennas Getting StartedAM antenna connection FM antenna connectionConnecting the Speakers Connecting the subwoofer speakerConnecting the front, center, and rear speakers Speaker Layout DiagramConnecting Audio/Video Components About connecting cordsFor video connections For audio connectionsVideo connections Audio connectionsGreen WhiteVCR connection DBS tuner connectionVCR WhiteCassette deck/CD recorder connection Digital connectionCD recorder Turn On the Power Adjust the VolumeBasic Operations Select the Source to PlayTurning Off the Power With the Sleep Timer Changing the Source NameInput mode On the remote controlWhen DVD is selected as the source, you can also Basic OperationsAttenuating the Input Signal Changing the Scanning ModeActivating the Recording Mode Input ATT indicatorBasic DVD Player Operations Open the Disc TrayLoad a Disc Start PlaybackSelect Surround Mode Turn Off the Power into StandbyActivate Realistic Sound Field Stop PlaybackTuning into Stations Manually Using Preset Tuning Tuner OperationsSelecting the FM Reception Mode Basic Settings Operating ProcedureOperation Buttons ¶ For subwoofer YESBasic Settings Set the appropriate digital terminal settingLow frequency effect attenuator-LFE Digital input Digital in terminals-DGTAV Compu Link Remote Control System on pages 59 Auto surround-AUTO SR Video output mode-VOUTOn the display Set the output terminal appropriatelySound Adjustments Press AdjustPress Control 3 or 2 to adjust Front speaker balance Adjustment itemsAdjusting sound from the remote control Front speaker output balance -BAL balanceTone-BASS and Treble DAP effect level-EFFECTCreating Realistic Sound Fields Dolby SurroundDTS Digital Surround DAP Digital Acoustic Processor modesAll Channel Stereo Reflections from behind Early reflections Direct soundsPossible × Impossible Activating Surround Mode Creating Realistic Sound FieldsSelecting Surround Modes Adjusting Surround Mode Using Remote Control Adjust the soundAdjust the speaker output levels as follows For using test toneDVD Player Operations Disc InformationPlayable Disc Types Discs you can play Disc TypeDisc structure Playback Control function PBCMenu-driven playback Using the On-screen Bar Contents of the on-screen bar with the pull-down menuDVD Player Operations Basic Operation through the On-screen Bar Changing the Time IndicationPress on Screen twice Press EnterLocating a Desired Scene from Disc Menu Press TOP Menu or MenuFrom the DVD menu From the VCD/SVCD menu with PBCSelecting a View Angle-ANGLE Press AnglePress Angle repeatedly to select the desired view angle Press and hold Angle for a few secondsChanging the Languages-SUBTITLE Press SubtitlePress Audio Press Audio repeatedly to select the desired audio languagePress Audio repeatedly to select the desired audio channel Selecting the audio channelFor VCD For SvcdPlaying from a Specified Position on a Disc Use the number buttons 0-9 to enter the timeLocating a desired chapter/track Chapter/Track Search Locating a desired position-Time SearchPress Digest Press cursor 5/∞/3/2 to move to the desired sceneLocating a desired scene-DIGEST Special Picture Playback Press cursor 3 or 2 repeatedly to select VFP mode Repeat steps 2 to 4 to adjust other parametersChanging the VFP setting-VFP To adjust the appearance of the pictureProgram Playback and Random Playback Repeat to program the next stepsPlaying back in the desired order Playing back tracks in random orderRepeat Playback Repeating a current title, group, chapter, or All tracksRepeating a desired part Activating Surround mode Additional Information for DVD AudioSpecial Playback for DVD Audio About indication on the front panelPress cursor ∞ or 5 repeatedly to select the desired Press the number buttons to select a bonus groupSelecting a still picture Playing back a bonus groupMP3 Disc Playback Basic OperationsLoad an MP3 disc, then press Operations through the MP3 Control Screen Press RepeatJpeg Disc Playback Slide-show PlaybackLoad a Jpeg disc, then press Operations through the Jpeg Control Screen Press Menu orOperation Buttons Configuration of Choice Menu Choice Menu OperationsPress Enter to finish the setting Press ChoicePress cursor 3 or 2 repeatedly To display Picture menu Press cursor ∞ or 5 repeatedly To move to ProgressiveChoice Menu Operations Language menuPicture menu Audio menu MP3Jpeg MAXSPK. Setting menu Others menu Select this to deactivate itSetting Parental Lock Restricting Playback by Parental LockChanging the setting of Parental Lock New setting is storedReleasing Parental Lock temporarily Country/Area codes list for Parental Lock Glossary for DVD Player AV Compu Link Remote Control System TV’s Video Input 1 terminal using S-video cablesConnections 1 AV Compu Link Connection Connections 2 Video Cable ConnectionRemote Control of the TV and VCR Using This Remote Control Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch Video PlayOperating JVC’s Audio/Video Components Operating Audio ComponentsCD recorder Sound control section AmplifierOperating Video Components STANDBY/ON VCRREW TV/VIDEOChanging the Preset Signal Codes Operating Other Manufacturers’ EquipmentRelease STANDBY/ON TV Try to operate your TV by pressingEnter the manufacturer’s code using the number buttons 1-9 Press and holdPress DBS Release STANDBY/ON DBSUsing the number buttons 1-9, 0. Test Operating Other Manufacturers’ EquipmentEnter the manufacturer’s code Release STANDBY/ON VCRMaintenance Cleaning DiscsCleaning the Unit General NotesTroubleshooting GenaralFor DVD Player Troubleshooting For TunerFor MP3 For JpegSpecifications AmplifierFM tuner IHF AM tunerVictor Company of JAPAN, Limited 0802NHMMDWJEM