ProForm 831.297890 user manual Assembly, Handrail Bolt yet

Page 5

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not

 

dispose of the packing materials until assembly is completed. Refer to the drawings below to identify the small

 

parts used in assembly. Assembly requires the included allen wrench

and your own phillips screw-

 

driver

, adjustable wrench

, open end wrench

and scissors

.

Pulse Handrail Bolt (98)Ð2

Handrail Washer (16)Ð4

Flange Nut (57)Ð2

3/8" Washer (61)Ð2

1/2" Screw (13)Ð2 Extension Leg Screw (34)Ð2

Handrail Bolt (15)Ð2

3/4" Screw (91)Ð4

3 1/2" Handrail Bolt (89)Ð2

1.With the help of a second person, carefully lay the treadmill on its right side as shown (refer to the drawing on page 4 to identify the right side).

Insert the Extension Legs (41) into the treadmill. Make sure that the Extension Legs are turned so the Base Pads (36) are on the indicated side. Attach each Extension Leg with an Extension Leg Screw (34).

With the help of a second person, carefully raise the treadmill to the upright position so the Extension Legs (41) are resting flat on the floor.

Refer to the inset drawing. Remove the nut, bolt, and shipping bracket from the left Upright (14).

2.Refer to HOW TO LOWER THE TREADMILL FOR USE on page 13. Follow the instructions in step 2 to lower the treadmill.

If there are any plastic ties in the Handrails, cut and re- move them.

Position the Left Handrail (2) on the left Upright (14). The lower end of the Left Handrail should be on the outside of the Extension Leg (41) as shown. Note: The Right Handrail will have a ÒRightÓ Sticker placed on it. Thread a Handrail Bolt (15) with a Handrail Washer (16) into the left Upright and the Left Handrail. Do not tighten the

Handrail Bolt yet.

Attach the lower end of the Left Handrail (2) to the Extension Leg (41) with a 3 1/2Ó Handrail Bolt (89), a 3/8Ó Washer (61), and a Flange Nut (57). Do not tighten the

Handrail Bolt yet.

1

34

 

41

 

 

36

 

 

 

Shipping

Bolt

 

Bracket

 

41

Nut

 

 

 

36

34

14

 

 

 

2

15

 

 

 

 

16

 

 

2

 

 

14

 

 

41

57

 

 

 

89 61

 

5

Image 5
Contents Customer HOT Line QUESTIONS?Visit OUR Website SEARS, Roebuck and CO., Hoffman ESTATES, ILImportant Precautions Table of ContentsPage Left Side Right Side Before YOU BeginHandrail Bolt yet AssemblyPage Tighten all parts used in this step and in step Not tighten the Handrail Bolt yetPerformant Lubetm Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Insert the key fully into the console Console DiagramSTEP-BY-STEP Console Operation Set the desired speed setting Pressmode.the Mode button to select the desiredIf the manual mode is selected Press Change the incline of the treadmill, if desiredPulse Sensor TROUBLE-SHOOTING When you are finished, remove the keyFollow your progress with the four displays Measure your heart rate, if desiredHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Top Maintenance and TROUBLE-SHOOTINGProblem The power turns off during use Problem The walking belt slips when walked on Problem The walking belt slows when walked onProblem The walking belt is off-center when walked on Workout Guidelines Conditioning GuidelinesExercise Intensity Suggested Stretches Key No. Qty Description Part LISTÑModel NoExploded DRAWINGÑModel No Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty