JVC RX7030VBK manual To the TV’s Video Input 1 jack using S-video cables, RX-8030VBK Equipment

English

AV COMPU LINK Remote Control System

The AV COMPU LINK remote control system allows you to operate JVC’s video components (TV, VCR, and DVD player) through the receiver.

This receiver is equipped with the AV COMPU LINK-III, which adds a function to the previous version in order to operate JVC’s video components through the video components terminals. To use this remote control system, connect the video components you want to operate, following the diagrams below and the procedure on the next page.

CONNECTIONS 1: AV COMPU LINK Connection

VCR

VHS

AV

COMPU LINK

DVD player

DVD

AV

COMPU LINK

AV

COMPULINK-

TV

AV

COMPU LINK EX

AV

COMPU LINK-ΙΙΙ

CAUTION:

You can only connect to the TV with the AV COMPU LINK EX or AV COMPU LINK-III jack.

DO NOT connect to the TV with

AV COMPU LINK RECEIVER/ AMP jack.

IMPORTANT:

The AV COMPU LINK remote control system cannot control the DBS tuner.

•For RX-8030VBK: Connect the VCR to the VCR 1 jacks. Video components connected to the VIDEO and VCR 2 jacks on the receiver cannot be controlled with the AV COMPU LINK remote control system.

Notes:

•When connecting the receiver and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot use automatic selection of TV’s input mode (see page 43).

•When connecting only the VCR or DVD player to this receiver, connect it directly to the receiver using cables with the monaural mini-plugs.

CONNECTIONS 2: Video Cable Connection

This receiver is equipped with three types of the video terminals—S-video, composite video, and component video, and the signals coming into this receiver through one type of video jacks can output only through the jack of the same type. So you need to connect the VCR and/or DVD player to the TV using one of the following three ways:

•When using the AV COMPU LINK remote control system, set the component video input for the DVD player and the DBS tuner correctly (see “Setting the Component Video Input” on page 30); otherwise, the correct input for this receiver will not be selected on the TV.

CASE 1	When connecting the source equipment to the receiver through the S-video jacks, connect this receiver
	to the TV’s Video Input 1 jack using S-video cables.
		Source		RX-8030VBK		TV
		equipment	S-video cord	RX-7030VBK	S-video cord
						To video Input 1
CASE 2	When connecting the source equipment to the receiver through the composite video jacks, connect
	this receiver to the TV’s Video Input 2 jack (composite video input) using composite video cables.
		Source		RX-8030VBK		TV
		equipment	Composite	RX-7030VBK	Composite
			video cord		video cord	To video Input 2
CASE 3	When connecting the source equipment to the receiver through the component video jacks, connect
	this receiver to the TV’s Video Input 2 jack (component video input) using component video cables.
		Source		RX-8030VBK		TV
		equipment	Component	RX-7030VBK	Component
			video cord		video cord	To video Input 2

42