JVC RX7030VBK manual Specifications, RX-8030VBK

Page 53

Specifications

RX-8030VBK

Amplifier

 

Output Power

 

At Stereo operation

Front ch:

130 W per channel, min. RMS, driven into 8 ,

 

20 Hz to 20 kHz, with no more than 0.08%

 

total harmonic distortion.

At Surround operation:

Front ch:

130 W per channel, min. RMS, driven into 8 at

 

1 kHz, with no more than 0.8% total harmonic

 

distortion.

Center ch:

130 W, min. RMS, driven into 8 at 1 kHz, with

 

no more than 0.8% total harmonic distortion.

Surround ch:

130 W per channel, min. RMS, driven into 8 at

 

1 kHz, with no more than 0.8% total harmonic

 

distortion.

Surround Back ch:

 

130 W, min. RMS, driven into 8 at 1 kHz, with

 

no more than 0.8% total harmonic distortion.

Audio

 

 

Audio Input Sensitivity/Impedance (1 kHz)

2.5 mV/47 k

PHONO IN (MM):

DVD IN, VCR 1 IN, VCR 2 IN, TV SOUND/DBS IN, VIDEO IN:

 

 

200 mV/47 k

CD IN, CDR IN, TAPE/MD IN:

200 mV/47 k

Audio Input (DIGITAL IN)*

0.5 V(p-p)/75

Coaxial:

DIGITAL 1 (DVD):

Optical:

DIGITAL 2 (CD), DIGITAL 3 (TV), DIGITAL 4 (CDR):

 

–21 dBm to –15 dBm (660 nm ±30 nm)

*Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).

Audio Output Level:

PRE OUT:

 

1 V

Recording Output Level: VCR 1 OUT, VCR 2 OUT, CDR OUT,

 

TAPE/MD OUT:

 

200 mV

Digital output:

Optical: DIGITAL OUTPUT

 

 

 

Signal wave length:

660 nm

 

 

Output level:

–21 dBm to –15 dBm

Signal-to-Noise Ratio (’66 IHF/’78 IHF)

 

 

PHONO IN:

 

70 dB/78 dB (at REC OUT)

DVD IN, VCR 1 IN, VCR 2 IN, TV SOUND/DBS IN, VIDEO:

 

 

 

 

87 dB/80 dB

CD IN, CDR IN, TAPE/MD IN:

 

87 dB/80 dB

Frequency Response (8 )

 

 

 

PHONO IN:

 

 

20 Hz to 20 kHz (±1 dB)

DVD IN, VCR 1 IN, VCR 2 IN, TV SOUND/DBS IN, VIDEO:

 

 

20 Hz to 100 kHz (+1 dB, –3 dB)

CD IN, CDR IN, TAPE/MD IN: 20 Hz to 100 kHz (+1 dB, –3 dB)

RIAA Phono Equalization:

±1.0 dB (20 Hz to 20 kHz)

Equalization (5 bands):

 

 

 

 

63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz (±8 dB)

Bass boost:

 

 

+6 dB ±1.0 dB at 100 Hz

Video

Video Input Sensitivity/Impedance Composite video:

DVD IN, VCR 1 IN, VCR 2 IN, TV SOUND/DBS IN, VIDEO: 1 V(p-p)/75

S-video:

DVD IN, VCR 1 IN, VCR 2 IN, TV SOUND/DBS IN, VIDEO:

 

(Y: luminance):

 

1 V(p-p)/75

 

(C: chrominance, burst):

0.286 V(p-p)/75

Component video: DVD IN, DBS IN:

 

 

(Y: luminance):

 

1 V(p-p)/75

 

(PB/PR):

 

0.7 V(p-p)/75

Video Output Level

 

 

 

Composite video:

 

 

1 V(p-p)/75

VCR 1 OUT, VCR 2 OUT, MONITOR OUT

S-video: VCR 1 OUT, VCR 2 OUT, MONITOR OUT

 

(Y: luminance):

 

1 V(p-p)/75

 

(C: chrominance, burst):

0.286 V(p-p)/75

Component video: MONITOR OUT:

 

 

(Y: luminance):

 

1 V(p-p)/75

 

(PB/PR):

 

0.7 V(p-p)/75

Synchronization:

 

 

Negative

Signal-to-Noise Ratio:

 

45 dB

FM tuner (IHF)

 

 

 

Tuning Range:

 

87.5 MHz to 108.0 MHz

Usable Sensitivity:

Monaural:

12.8 dBf (1.2 µV/75 )

50 dB Quieting Sensitivity: Monaural:

16.0 dBf (1.7 µV/75 )

 

Stereo:

37.5 dBf (20.5 µV/75 )

Stereo Separation at REC OUT:

 

35 dB at 1 kHz

AM tuner

 

 

 

Tuning Range:

 

530 kHz to 1 710 kHz

General

 

 

 

Power Requirements:

 

AC 120V , 60 Hz

Power Consumption:

 

320 W/440 VA (at operation)

 

 

2 W (in standby mode)

Dimensions (W x H x D):

435 mm x 157 mm x 425 mm

 

(17 3/16 in. x 6 3/16 in. x 16 3/4 in.)

Mass:

 

 

12.2 kg (27.0 lbs)

Designs & specifications are subject to change without notice

51

Image 53
Contents For RX-8030VBK RX-8030VBK RX-7030VBK/RX-7032VSLMises en garde, précautions et indications diverses Table of Contents Introduction FeaturesPrecautions Parts Identification Remote ControlDisplay Window How to open the front doorFront Panel For RX-7030VBK/RX-7032VSL Bass Boost button and lamp DVD MULTI, DVD, VCR 1, VCR 2, VideoRX-8030VBK Rear PanelRX-8030VBK Remote ControlRX-7030VBK RX-7032VSLConnecting the FM and AM Antennas Before InstallationChecking the Supplied Accessories Putting Batteries in the Remote ControlConnecting the Speakers Insert the speaker signal cableBasic connecting procedure Close the speaker terminalRight / Left Connecting the subwoofer speakerPlacing speakers Enhancing your audio system Connecting Audio/Video ComponentsOnly for RX-8030VBK Analog ConnectionsCD recorder CD playerFor RX-8030VBK Cassette deckMD recorder When using the digital input terminalVideo component connections If your video components have an AV Compulink jackTo audio input To audio output Ç To S-video output VCRsRX-8030VBK To S-video input To composite video input TV and/or DBS tunerRX-8030VBK RX-7030VBK/RX-7032VSL DVD playerDVD player To listen to the sound after connection, press DVD MultiPlug the power cord into an AC outlet Connecting the Power CordDigital Connections Digital output terminalBasic Operations Daily Operational Procedure Selecting the Source to PlayTurning On the Power Speaker and signal indicators on the display Adjusting the VolumeSelecting different sources for picture and sound On the unitListening with headphones only Selecting the Analog or Digital Input ModeTo use the speakers connected to the Front Speakers On the nextTo select the analog input mode again Setting the Dynamic RangePress TV SOUND/DBS Press Analog Direct so that a Direct appears on the displayPress CC Converter so that the lamp on the button lights up Press TAPE/MDReinforcing the Bass Using the Sleep TimerMuting the Sound Changing the Display BrightnessTo store the preset stations Tuning in to Stations Manually Using Preset TuningReceiving Radio Broadcasts Press FM or AM to select the bandWhile listening to an FM station, press FM Mode Selecting the FM Reception ModePress the 10 keys to select a preset channel number To tune in a preset stationSetting the Speakers Configuration Remote Basic SettingsPress Quick Speaker Setup Press in Multi JOG Push SETSpeakers channels number and the size Basic Setting ItemsRoom size and the speaker distance Items To do SeePress Setting Basic ProcedureSetting the Speakers Push in Multi JOG Push SETSelect one of the following Setting the Speaker DistanceSetting the Bass Sounds Select the playback sounds channel Setting the Digital Input TerminalsSelecting main or sub channel-DUAL Mono Memorizing the Volume Level for Each Source Setting the Component Video InputTo recall the volume level To cancel the One Touch OperationBasic Setting Items Basic Procedure Adjusting SoundPress Adjust Ex. When adjusting the subwoofer level toAdjusting the Speaker Output Levels Adjusting the Equalization PatternsEqualization adjustment-DIGITAL EQ Repeat steps 2 and 3 to adjust the other center frequencyAdjustable parameters Select a speaker you want to adjustFor DAP modes For Pro Logic II Music onlyReproducing Theater Ambience Introducing the Surround Modes Using the Surround ModesDTS Digital Surround What is Dual Mono?DTS Extended Surround DTS-ES DTS 96/24EX/ES Setting Available Surround Mode Incoming Signal TypeSurround Modes Applicable to the Various Software 3D Headphone Mode-3D H PhoneSelect and play any source other than DVD Multi Press Surround to activate the Surround modeActivating the Surround Modes 3D Headphone Mode Using the DSP ModesReproducing the Sound Field Introducing the DSP ModesALL Channel Stereo mode To cancel the DSP modesMulti-channel digital signals Activating the DSP ModesActivating the DVD Multi Playback Mode Using the DVD Multi Playback ModeMulti indicator also lights up Press DVD Multi so that DVD Multi appears on the displaySame time Compu Link Remote Control SystemPress the play 3 button on the CD player RX-8030VBKRX-7030VBK RX-7032VSLConnections 2 Video Cable Connection AV Compu Link Remote Control SystemConnections 1 AV Compu Link Connection Automatic Power On/Off Automatic Selection of TV’s Input ModeOne-Touch Video Play One-Touch DVD PlayOperating Audio Components Operating JVC’s Audio/Video ComponentsTuner Sound control section Amplifier7/P CD changerCD recorder Cassette deckDVD player Operating Video ComponentsCH + Operating Other Manufacturers’ Video Equipment Release VCR 1 or VCR Enter manufacturer’s code using buttons 1 9,Press and hold Audio Press DVD Release AudioFor DBS tuner For TV For VCR Manufacturer CodesManufacturer Codes For DVD playerProblem Possible Cause Solution TroubleshootingRX-8030VBK SpecificationsRX-7030VBK/RX-7032VSL Output Power At Stereo operationAudio Input Sensitivity/Impedance 1 kHz 200 mV/47 kΩ CoaxialDIGITAL 1 DVDLimited WARRANTYAUDIO-2 Authorized Service Centers RX-7030VBK/RX-7032VSL AUDIO/VIDEO Control Receiver RX-8030VBK RX-7030VBK Mises en garde, précautions et indications diverses For Canada/pour le Canada RX-8030VBK/RX-7030VBK English Introduction For RX-7030VBK RX-8030VBK RX-7030VBKVCR TV SOUND/DBS Only for RX-8030VBKDVD MULTI, DVD, VCR , TV SOUND/DBS, CD, TAPE/CDR, FM, AM RX-7030VBK Differences between RX-8030VBK and RX-7030VBK Digital 4 CDRGetting Started RX-7030VBK For Front Speakers 2 terminals Installation information properly. You can use Quick After connecting the speakers, set the speakerSetting see Setting the Speakers onCenter speaker RX-8030VBK Left front speakerFor RX-7030VBK RX-8030VBK/RX-7030VBK CD playerRX-7030VBK RX-7030VBK CD recorder To audio input To audio outputVideo camera RX-7030VBK ‰ To S-video input To composite video input RX-8030VBK/RX-7030VBKRX-8030VBK/RX-7030VBK DVD player Connecting the Power Cord DVD FM/AM VCR1 VCR2 CDR TAPE/MD LS RS Selecting the Front Speakers Attenuating the Input Signal For RX-7030VBK Brightness Receiving Radio Broadcasts Selecting the FM Reception Mode Basic Settings Basic Setting Items Basic Procedure 11 ft Dual Mono format is not identical with bilingual Setting the Component Video Input Adjusting Sound Adjusting the Equalization Patterns Select a speaker you want to adjust Surround back speakers LSB/RSB DTS*2 OFF Activating the Surround Modes Using the DSP Modes Activating the DSP Modes RX-8030VBK/RX-7030VBK CD player Cassette deck CD recorder RX-8030VBK Equipment Video cord RX-7030VBK To the TV’s Video Input 1 jack using S-video cablesRX-8030VBK Equipment Source RX-8030VBK EquipmentOne-Touch Video Play Surrl Surrr Surr Back SBK Start playing Stop playing MD recorderDVD TV/DBS Press and hold CATV/DBS To change the transmittable signals forOperating a Catv converter or DBS tuner Operating another manufacturer’s TVEnter manufacturer’s code using buttons 1 9, Zenith Nokia Philips 15, 17, 28 Nordmende Orion For TV For VCRCodes Manufacturer Short circuit of speaker terminals Specifications RX-7030VBK EN, FR Victor Company of JAPAN, Limited 0203NHMMDWJEIN