JVC RX7030VBK Enter manufacturer’s code using buttons 1 9, Release VCR 1 or VCR, Release Audio

To change the transmittable signals for operating another manufacturer’s VCR

1.Press and hold VCR 1 (for RX-8030VBK) or VCR (for RX-7030VBK/RX-7032VSL).

2.Press VCR 1 (for RX-8030VBK) or VCR (for RX-

7030VBK/RX-7032VSL).

For RX-8030VBK:“CALL” appears on the display window of the remote control.

3. Enter manufacturer’s code using buttons 1 – 9, and 0.

See the list on page 49 to find the code.

4. Release VCR 1 or VCR .

The following buttons can be used for operating a VCR:

VCR 1 : For RX-8030VBK—Turn on and off a VCR.

VCR : For RX-7030VBK/RX-7032VSL—Turn on and off a VCR.

After pressing VCR 1 or VCR, you can perform the following operations on a VCR:

CH +/–:Change the TV channels on a VCR.

To change the transmittable signals for operating another manufacturer’s DVD player

1. Press and hold AUDIO .

2 Press DVD.

For RX-8030VBK:“CALL” appears on the display window of the remote control.

3. Enter a manufacturer’s code using buttons 1 – 9, and 0.

See the list on page 49 to find the code.

4. Release AUDIO .

After pressing DVD or DVD MULTI, you can perform the following operations on a DVD player:

3: Start playing.

4: Return to the beginning of the current (or previous) chapter.

¢: Skip to the beginning of the next chapter.

7: Stop playing.

8: Pause playing. To resume, press 3.

1 – 10/0, 0, 100+ (+10):

	Select the TV channels.
	The 10/0 button will function as the ENTER
	button if your VCR requires pressing ENTER
	after selecting a channel number.
3:	Start playback.
REW:	Rewind a tape.

FF:Fast wind a tape.

7:Stop playing or recording.

8:Pause playing. To resume, press 3.

After pressing DVD or DVD MULTI, these buttons can be used for the DVD menu operations.

4

Note:

For detailed menu operations, refer to the instructions supplied with the discs or the

DVD player.

2 3

MENU

56

ENTER

8

REC PAUSE: Enter recording pause by pressing this button. To start recording again, press this button then 3.

5. Try to operate your VCR by pressing VCR 1 or VCR .

When your VCR turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

VCR, try each one until the correct one is entered.

5.Try to operate your DVD player by pressing one of the above buttons.

•DO NOT forget to turn on a DVD player before pressing one of the above buttons.

If there are more than one code listed for your brand of

DVD, try each one until the correct one is entered.

48