JVC RX7030VBK manual Specifications

Page 112

Specifications

RX-8030VBK

Amplifier

 

Output Power

 

At Stereo operation

Front ch:

130 W per channel, min. RMS, driven into 8 ,

 

20 Hz to 20 kHz, with no more than 0.08%

 

total harmonic distortion.

At Surround operation:

Front ch:

130 W per channel, min. RMS, driven into 8 at

 

1 kHz, with no more than 0.8% total harmonic

 

distortion.

Center ch:

130 W, min. RMS, driven into 8 at 1 kHz, with

 

no more than 0.8% total harmonic distortion.

Surround ch:

130 W per channel, min. RMS, driven into 8 at

 

1 kHz, with no more than 0.8% total harmonic

 

distortion.

Surround Back ch:

 

130 W, min. RMS, driven into 8 at 1 kHz, with

 

no more than 0.8% total harmonic distortion.

Audio

 

 

Audio Input Sensitivity/Impedance (1 kHz)

2.5 mV/47 k

PHONO IN (MM):

DVD IN, VCR 1 IN, VCR 2 IN, TV SOUND/DBS IN, VIDEO IN:

 

 

200 mV/47 k

CD IN, CDR IN, TAPE/MD IN:

200 mV/47 k

Audio Input (DIGITAL IN)*

0.5 V(p-p)/75

Coaxial:

DIGITAL 1 (DVD):

Optical:

DIGITAL 2 (CD), DIGITAL 3 (TV), DIGITAL 4 (CDR):

 

–21 dBm to –15 dBm (660 nm ±30 nm)

*Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).

Audio Output Level:

PRE OUT:

 

1 V

Recording Output Level: VCR 1 OUT, VCR 2 OUT, CDR OUT,

 

TAPE/MD OUT:

 

200 mV

Digital output:

Optical: DIGITAL OUTPUT

 

 

 

Signal wave length:

660 nm

 

 

Output level:

–21 dBm to –15 dBm

Signal-to-Noise Ratio (’66 IHF/’78 IHF)

 

 

PHONO IN:

 

70 dB/78 dB (at REC OUT)

DVD IN, VCR 1 IN, VCR 2 IN, TV SOUND/DBS IN, VIDEO:

 

 

 

 

87 dB/80 dB

CD IN, CDR IN, TAPE/MD IN:

 

87 dB/80 dB

Frequency Response (8 )

 

 

 

PHONO IN:

 

 

20 Hz to 20 kHz (±1 dB)

DVD IN, VCR 1 IN, VCR 2 IN, TV SOUND/DBS IN, VIDEO:

 

 

20 Hz to 100 kHz (+1 dB, –3 dB)

CD IN, CDR IN, TAPE/MD IN: 20 Hz to 100 kHz (+1 dB, –3 dB)

RIAA Phono Equalization:

±1.0 dB (20 Hz to 20 kHz)

Equalization (5 bands):

 

 

 

 

63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz (±8 dB)

Bass boost:

 

 

+6 dB ±1.0 dB at 100 Hz

Video

Video Input Sensitivity/Impedance Composite video:

DVD IN, VCR 1 IN, VCR 2 IN, TV SOUND/DBS IN, VIDEO: 1 V(p-p)/75

S-video:

DVD IN, VCR 1 IN, VCR 2 IN, TV SOUND/DBS IN, VIDEO:

 

(Y: luminance):

 

1 V(p-p)/75

 

(C: chrominance, burst):

0.286 V(p-p)/75

Component video: DVD IN, DBS IN:

 

 

(Y: luminance):

 

1 V(p-p)/75

 

(PB/PR):

 

0.7 V(p-p)/75

Video Output Level

 

 

 

Composite video:

 

 

1 V(p-p)/75

VCR 1 OUT, VCR 2 OUT, MONITOR OUT

S-video: VCR 1 OUT, VCR 2 OUT, MONITOR OUT

 

(Y: luminance):

 

1 V(p-p)/75

 

(C: chrominance, burst):

0.286 V(p-p)/75

Component video: MONITOR OUT:

 

 

(Y: luminance):

 

1 V(p-p)/75

 

(PB/PR):

 

0.7 V(p-p)/75

Synchronization:

 

 

Negative

Signal-to-Noise Ratio:

 

45 dB

FM tuner (IHF)

 

 

 

Tuning Range:

 

87.5 MHz to 108.0 MHz

Usable Sensitivity:

Monaural:

12.8 dBf (1.2 µV/75 )

50 dB Quieting Sensitivity: Monaural:

16.0 dBf (1.7 µV/75 )

 

Stereo:

37.5 dBf (20.5 µV/75 )

Stereo Separation at REC OUT:

 

35 dB at 1 kHz

AM tuner

 

 

 

Tuning Range:

 

530 kHz to 1 710 kHz

General

 

 

 

Power Requirements:

 

AC 120V , 60 Hz

Power Consumption:

 

320 W/440 VA (at operation)

 

 

2 W (in standby mode)

Dimensions (W x H x D):

435 mm x 157 mm x 425 mm

 

(17 3/16 in. x 6 3/16 in. x 16 3/4 in.)

Mass:

 

 

12.2 kg (27.0 lbs)

Designs & specifications are subject to change without notice

English

51

Image 112
Contents RX-8030VBK RX-7030VBK/RX-7032VSL For RX-8030VBKMises en garde, précautions et indications diverses Table of Contents Precautions FeaturesIntroduction Remote Control Parts IdentificationFront Panel How to open the front doorDisplay Window DVD MULTI, DVD, VCR 1, VCR 2, Video For RX-7030VBK/RX-7032VSL Bass Boost button and lampRear Panel RX-8030VBKRemote Control RX-8030VBKRX-7030VBK RX-7032VSLBefore Installation Connecting the FM and AM AntennasChecking the Supplied Accessories Putting Batteries in the Remote ControlInsert the speaker signal cable Connecting the SpeakersBasic connecting procedure Close the speaker terminalPlacing speakers Connecting the subwoofer speakerRight / Left Connecting Audio/Video Components Enhancing your audio systemOnly for RX-8030VBK Analog ConnectionsCD player CD recorderFor RX-8030VBK Cassette deckWhen using the digital input terminal MD recorderVideo component connections If your video components have an AV Compulink jackVCRs To audio input To audio output Ç To S-video outputRX-8030VBK To S-video input To composite video input TV and/or DBS tunerDVD player RX-8030VBK RX-7030VBK/RX-7032VSLDVD player To listen to the sound after connection, press DVD MultiConnecting the Power Cord Plug the power cord into an AC outletDigital Connections Digital output terminalTurning On the Power Daily Operational Procedure Selecting the Source to PlayBasic Operations Adjusting the Volume Speaker and signal indicators on the displaySelecting different sources for picture and sound On the unitSelecting the Analog or Digital Input Mode Listening with headphones onlyTo use the speakers connected to the Front Speakers On the nextSetting the Dynamic Range To select the analog input mode againPress Analog Direct so that a Direct appears on the display Press TV SOUND/DBSPress CC Converter so that the lamp on the button lights up Press TAPE/MDUsing the Sleep Timer Reinforcing the BassMuting the Sound Changing the Display BrightnessTuning in to Stations Manually Using Preset Tuning To store the preset stationsReceiving Radio Broadcasts Press FM or AM to select the bandSelecting the FM Reception Mode While listening to an FM station, press FM ModePress the 10 keys to select a preset channel number To tune in a preset stationBasic Settings Setting the Speakers Configuration RemotePress Quick Speaker Setup Press in Multi JOG Push SETBasic Setting Items Speakers channels number and the sizeRoom size and the speaker distance Items To do SeeBasic Procedure Press SettingSetting the Speakers Push in Multi JOG Push SETSetting the Bass Sounds Setting the Speaker DistanceSelect one of the following Selecting main or sub channel-DUAL Mono Setting the Digital Input TerminalsSelect the playback sounds channel Setting the Component Video Input Memorizing the Volume Level for Each SourceTo recall the volume level To cancel the One Touch OperationAdjusting Sound Basic Setting Items Basic ProcedurePress Adjust Ex. When adjusting the subwoofer level toAdjusting the Equalization Patterns Adjusting the Speaker Output LevelsEqualization adjustment-DIGITAL EQ Repeat steps 2 and 3 to adjust the other center frequencySelect a speaker you want to adjust Adjustable parametersFor DAP modes For Pro Logic II Music onlyUsing the Surround Modes Reproducing Theater Ambience Introducing the Surround ModesWhat is Dual Mono? DTS Digital SurroundDTS Extended Surround DTS-ES DTS 96/24Incoming Signal Type EX/ES Setting Available Surround ModeSurround Modes Applicable to the Various Software 3D Headphone Mode-3D H PhoneActivating the Surround Modes Press Surround to activate the Surround modeSelect and play any source other than DVD Multi Using the DSP Modes 3D Headphone ModeReproducing the Sound Field Introducing the DSP ModesTo cancel the DSP modes ALL Channel Stereo modeMulti-channel digital signals Activating the DSP ModesUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModeMulti indicator also lights up Press DVD Multi so that DVD Multi appears on the displayCompu Link Remote Control System Same timePress the play 3 button on the CD player RX-8030VBKRX-7030VBK RX-7032VSLConnections 1 AV Compu Link Connection AV Compu Link Remote Control SystemConnections 2 Video Cable Connection Automatic Selection of TV’s Input Mode Automatic Power On/OffOne-Touch Video Play One-Touch DVD PlayOperating JVC’s Audio/Video Components Operating Audio ComponentsTuner Sound control section AmplifierCD changer 7/PCD recorder Cassette deckCH + Operating Video ComponentsDVD player Operating Other Manufacturers’ Video Equipment Enter manufacturer’s code using buttons 1 9, Release VCR 1 or VCRPress and hold Audio Press DVD Release AudioFor TV For VCR Manufacturer Codes For DBS tunerManufacturer Codes For DVD playerTroubleshooting Problem Possible Cause SolutionSpecifications RX-8030VBKOutput Power At Stereo operation RX-7030VBK/RX-7032VSLAudio Input Sensitivity/Impedance 1 kHz 200 mV/47 kΩ CoaxialDIGITAL 1 DVDLimited WARRANTYAUDIO-2 Authorized Service Centers RX-7030VBK/RX-7032VSL AUDIO/VIDEO Control Receiver RX-8030VBK RX-7030VBK Mises en garde, précautions et indications diverses For Canada/pour le Canada RX-8030VBK/RX-7030VBK English Introduction RX-8030VBK RX-7030VBK For RX-7030VBKOnly for RX-8030VBK VCR TV SOUND/DBSDVD MULTI, DVD, VCR , TV SOUND/DBS, CD, TAPE/CDR, FM, AM RX-7030VBK Digital 4 CDR Differences between RX-8030VBK and RX-7030VBKGetting Started RX-7030VBK For Front Speakers 2 terminals After connecting the speakers, set the speaker Installation information properly. You can use QuickSetting see Setting the Speakers onRX-8030VBK Left front speaker Center speakerRX-8030VBK/RX-7030VBK CD player For RX-7030VBKRX-7030VBK RX-7030VBK CD recorder To audio input To audio outputVideo camera RX-8030VBK/RX-7030VBK RX-8030VBK/RX-7030VBKRX-7030VBK ‰ To S-video input To composite video input DVD player Connecting the Power Cord DVD FM/AM VCR1 VCR2 CDR TAPE/MD LS RS Selecting the Front Speakers Attenuating the Input Signal For RX-7030VBK Brightness Receiving Radio Broadcasts Selecting the FM Reception Mode Basic Settings Basic Setting Items Basic Procedure 11 ft Dual Mono format is not identical with bilingual Setting the Component Video Input Adjusting Sound Adjusting the Equalization Patterns Select a speaker you want to adjust Surround back speakers LSB/RSB DTS*2 OFF Activating the Surround Modes Using the DSP Modes Activating the DSP Modes RX-8030VBK/RX-7030VBK CD player Cassette deck CD recorder To the TV’s Video Input 1 jack using S-video cables RX-8030VBK Equipment Video cord RX-7030VBKRX-8030VBK Equipment Source RX-8030VBK EquipmentOne-Touch Video Play Surrl Surrr Surr Back SBK MD recorder Start playing Stop playingDVD TV/DBS To change the transmittable signals for Press and hold CATV/DBSOperating a Catv converter or DBS tuner Operating another manufacturer’s TVEnter manufacturer’s code using buttons 1 9, Codes Manufacturer For TV For VCRZenith Nokia Philips 15, 17, 28 Nordmende Orion Short circuit of speaker terminals Specifications RX-7030VBK EN, FR Victor Company of JAPAN, Limited 0203NHMMDWJEIN