ProForm 831.297781 user manual ¥ The CR 2032 battery may need to be replaced, Battery

Page 8

¥As you walk or run on the treadmill, position yourself near the center of the walking belt. For the console to display heart rate readings, the user must be within armÕs length of the console.

¥The chest pulse sensor is designed to work with people who have normal heart rhythms. Heart rate reading problems may be caused by medical conditions such as premature ventricular contractions (pvcs), tachycardia bursts, and arrhythmia.

¥The operation of the chest pulse sensor can be affected by magnetic interference caused by high power lines or other sources. If it is suspected that magnetic interference may be causing a problem, try relocating the treadmill.

¥The CR 2032 battery may need to be replaced.

Locate the battery

 

cover on the back of

 

the sensor unit. Insert a

 

coin into the slot in the

 

cover, turn the cover

 

counterclockwise, and

 

remove it. Remove the

 

old battery and insert a

 

new CR 2032 battery,

 

making sure that the

CR 2032

battery is turned so the

Battery

writing is on top. Make

 

sure that the rubber

Rubber

gasket is in place in the

Gasket

sensor unit. Replace

 

the battery cover and

 

turn it clockwise to

 

close it.

 

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model No Serial No SEARS, Roebuck and CO., Hoffman ESTATES, ILTable of Contents Important PrecautionsThere is one Before YOU Begin Left Right SidePhillips AssemblyAssembly requires the included allen wrench Page HOW to USE the Chest Pulse Sensor HOW to PUT on the Chest Pulse SensorCare and Maintenance Chest Pulse Sensor TROUBLE-SHOOTING¥ The CR 2032 battery may need to be replaced BatteryPerformant Lubetm Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Diagram of the Console Features of the ConsoleHOW to Turn on the Power Make sure that Position On/off switch is ÒonÓ positionHOW to USE the Manual Mode Pulse displayÑWhen the chest pulse sensor is TIME/PACE displayÑCALS./FAT Cals DISTANCE/LAPS displayÑThis displayPress the Start button to start the program HOW to USE the Speed ProgramsSelect the desired speed program HOW to USE the Heart Rate Programs Select the desired heart rate programHOW to USE the Fitness Test Program Follow your progress with the LED trackTreadmill is set at 1.5%. Remove the key Select the Fitness Test programPage HOW to Create a Custom Program Insert the key into the consoleSelect one of the custom programs Hold down STOP/PAUSE button for two SecondsHOW to USE a Custom Program When the program is completed, remove the keyHOW to Select the Information Mode Press the Start buttonHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Adjust the Firmness of the Walking Platform HOW to Move the Treadmill HOW to Lower the Treadmill for USEMaintenance and TROUBLE-SHOOTING Problem The power turns off during useProblem The heart rate monitor does not function properly CR 2032 battery may need to be replacedWorkout Guidelines Conditioning GuidelinesExercise Intensity Suggested Stretches Part LISTÑModel No Key No. Qty Description8Ó White Wire, Male/Female 108 111 113 121 115 120 105 114 109 104 5356 106 116 117 Exploded DRAWINGÑModel No SEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, IL Full 90 DAY WarrantyModel No
Top Page Image Contents