JVC RX-5000VBK manual Attenuating the Input Signal, Reinforcing the Bass, Adjusting the Tone

Page 12

Attenuating the Input Signal

When the input level of the playing source is too high, the sounds will be distorted. If this happens, you need to attenuate the input signal level to prevent the sound distortion.

On the front panel ONLY:

INPUT ATT.

Press INPUT ATT. so that the lamp next to

Reinforcing the Bass

With this Bass Boost function, you can boost the bass level.

Before you start, remember...

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

the button lights up.

•Each time you press the button, the Input Attenuator mode turns on or off.

Note:

When using DVD MULTI playback mode, this effect only applies to front left and right channel signals.

Adjusting the Front Speaker Output

Balance

If the sounds you hear from the front right and left speakers are unequal, you can adjust the speaker output balance.

Before you start, remember...

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the front panel ONLY:

1. Press ADJUST so that the MULTI CURSOR %/ Þbuttons work for adjusting the sound.

2. Press MULTI CURSOR %/ Þ until “B–BOOST” appears on the display.

3.Press MULTI CURSOR @/ #to switch this function “ON” or “OFF.”

•When this function is switched “ON,” the BASS BOOST lamp on the front panel lights up.

Note:

ADJUST

MULTI CURSOR

MULTI CURSOR

The Bass Boost function affects the front speaker sounds only.

On the front panel ONLY:

1. Press ADJUST so that the MULTI CURSOR %/ Þbuttons work for adjusting the sound.

2. Press MULTI CURSOR %/ Þ repeatedly until “BALANCE” appears on the display.

ADJUST

MULTI CURSOR

Adjusting the Tone

You can adjust the treble and bass sounds as you like.

Before you start, remember...

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

3. Press MULTI CURSOR @/ #to

MULTI CURSOR

adjust the balance.

 

•Pressing @decreases the right channel output.

•Pressing #decreases the left channel output.

On the front panel ONLY:

1. Press ADJUST so that the MULTI

ADJUST

 

CURSOR %/ Þbuttons work for

 

adjusting the sound.

 

2.Press MULTI CURSOR %/ Þ repeatedly until “– BASS +” or “–TREBLE+” appears on the display.

•Select “– BASS +” to adjust the bass sound level.

•Select “–TREBLE+” to adjust the treble sound level.

3.Press MULTI CURSOR @/ #to adjust the bass or treble sound

level within the range of –10 to +10.

•Each time you press the button, the sound level changes by ±2.

MULTI CURSOR

MULTI CURSOR

10

Page 11 Page 13
Image 12
Page 11 Page 13
Contents RX-5000VBK For U.S.A Table of Contents Remote Control Parts IdentificationFront Panel To use the Cursor control buttons q on the front panelBefore Installation Connecting the FM and AM AntennasChecking the Supplied Accessories Getting StartedConnecting the Speakers Basic connecting procedureConnecting the front speakers Connecting the rear and center speakersConnecting Audio/Video Components Connecting the subwoofer speakerAudio component connections If your audio components have a Compu LINK-3 terminalVideo component connections VCRConnecting the Power Cord Putting Batteries in the Remote ControlPlug the power cord into an AC outlet + to + and toTurning the Power On and Off Standby From the remote controlBasic Operations On the front panelMuting the Sound Selecting the Front SpeakersRecording a Source Attenuating the Input Signal Adjusting the Front Speaker Output BalanceAdjusting the Tone Reinforcing the BassSetting Center and Rear Speakers for DSP Modes Changing the Source NameStoring the Basic Settings Adjustments One Touch Operation Using the Sleep TimerPress ONE Touch Operation Tuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Press FM or AMSelecting the FM Reception Mode Using the DSP Modes 3D-PHONIC modesDAP modes Surround ModesAvailable DSP Modes According to the Speaker Arrangement Speaker arrangements Available DSP modesAdjusting the 3D-PHONIC Modes Adjusting the DAP ModesPress Rearl / + to adjust Press Surround repeatedlyRear speaker output level Output balancePress Surround repeatedly Until the DSP mode you want To cancel the DSP modeActivating the DSP Modes Select and play a sound sourceUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModeCompu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverSame time Automatic Source SelectionOperating JVC’s Audio/Video Components Sound control section AmplifierCassette deck TunerCD player-changer MD recorderDVD player Troubleshooting Problem Possible Cause SolutionSpecifications AmplifierFM tuner IHF AM tunerHOW to Locate Your JVC Service Center Limited Warranty AUDIO-2 1299HIMMDWJEIN

RX-5000VBK specifications

The JVC RX-5000VBK is a powerful and versatile audio receiver that offers a rich set of features for both home theater enthusiasts and casual listeners. This unit is designed to deliver excellent sound quality, impressive connectivity options, and user-friendly operation.

One of the standout features of the RX-5000VBK is its ability to deliver high-fidelity audio with clarity and depth, making it an ideal choice for those who value sound quality. With an output of 100 watts per channel, this receiver can drive a variety of speakers, ensuring that users get the best possible performance whether they are enjoying music or watching movies.

The RX-5000VBK integrates advanced surround sound processing capabilities, supporting formats like Dolby Digital and DTS. This processing allows users to experience immersive audio, bringing movies and music to life in a way that's rich and engaging. The unit also includes a built-in equalizer, which allows users to customize their listening experience by adjusting bass and treble settings to their preference.

Connectivity is another strong point of the JVC RX-5000VBK. The receiver comes equipped with multiple HDMI inputs that support 4K video pass-through, enabling users to connect their favorite devices such as Blu-ray players, gaming consoles, and streaming devices without sacrificing video quality. Additionally, there are various analog and digital audio inputs, including optical and coaxial options, making it easy to connect vintage components as well.

The user interface of the RX-5000VBK is designed for simplicity, featuring an intuitive layout that makes it easy to navigate through settings and modes. The included remote control enhances this convenience, allowing users to make adjustments from the comfort of their seating area. Furthermore, the receiver features a built-in AM/FM tuner with programmable presets, enabling users to enjoy their favorite radio stations with ease.

The design of the RX-5000VBK is both stylish and functional, featuring a sleek black finish that can fit well with any home décor. The unit’s compact form factor ensures it can be integrated into various home setups without taking up too much space.

In summary, the JVC RX-5000VBK is a feature-rich audio receiver that excels in delivering high-quality sound, versatile connectivity options, and user-friendly operation. With its combination of advanced technologies and thoughtful design, it stands as an excellent choice for anyone looking to enhance their audio experience at home.
Top Page Image Contents