JVC RX-5000VBK manual Using the DVD Multi Playback Mode, Activating the DVD Multi Playback Mode

Page 22

Using the DVD MULTI Playback Mode

This receiver provides the DVD MULTI playback mode for reproducing the analog discrete output mode of the DVD player. Before playing back a DVD, refer also to the manual supplied with the DVD player.

Activating the DVD MULTI Playback Mode

You can adjust the DVD MULTI playback mode while playing back a DVD using the analog discrete output mode on the DVD player. Once you made adjustments, the receiver memorizes the adjustments until you change them.

Before you start, remember...

•Make sure that you have set the speaker information correctly (see page 11).

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•You can only adjust the rear and/or center speaker output levels when you have connected rear speakers and/or a center speaker and have set “REAR SPK” and/or “CNTR SPK” correctly. See page 11.

On the front panel:

DVD MULTI

1. Press DVD MULTI .

Note:

When you select “DVDMULTI” as the source to play, the DSP mode is canceled temporarily, and the SURROUND button does not work.

MULTI CURSOR

7. Press MULTI CURSOR @/ #to adjust the left rear speaker output level (from –10 to +10).

MULTI CURSOR

8. Press MULTI CURSOR %/ Þ repeatedly until “–REAR R+” appears on the display.

MULTI CURSOR

9.Press MULTI CURSOR @/ #to adjust the right rear speaker output level (from –10 to +10).

From the remote control:

1. Press DVD MULTI.

DVD MULTI

 

Note:

When you select “DVDMULTI” as the source to play, the DSP mode is canceled temporarily, and the SURROUND button does not work.

2.Select the analog discrete output mode on the DVD player, and start playing a DVD.

• Refer to the manual supplied with the DVD player.

If you need to make any adjustment, go to the following steps.

3. Press ADJUST so that the MULTI

ADJUST

 

CURSOR %/ Þ/ @/ # buttons

 

work for adjusting the DVD

 

MULTI playback setting.

 

2.Select the analog discrete output mode on the DVD player, and start playing a DVD.

• Refer to the manual supplied with the DVD player.

If you need to make any adjustment, go to the following steps.

3. Press SOUND CONTROL.

SOUND

CONTROL

The 10 keys are activated for adjusting the sound.

MULTI CURSOR

4. Press MULTI CURSOR %/ Þ repeatedly until “–CENTER+” appears on the display.

MULTI CURSOR

5.Press MULTI CURSOR @/ #to adjust the center speaker output level (from –10 to +10).

4. Press CENTER – / + to adjust the

center speaker output level.

• Pressing CENTER – decreases the output

level up to –10 dB.

• Pressing CENTER + increases the output

level up to +10 dB.

5. Press REAR•L – / + to adjust the

left rear speaker output level.

• Pressing REAR•L – decreases the output

level up to –10 dB.

• Pressing REAR•L + increases the output

level up to +10 dB.

– CENTER +

5

6

5

– REAR•L +

85 9

6. Press MULTI CURSOR %/ Þ repeatedly until “–REAR L+” appears on the display.

MULTI CURSOR

6. Press REAR•R – / + to adjust the

right rear speaker output level.

• Pressing REAR•R – decreases the output

level up to –10 dB.

• Pressing REAR•R + increases the output

level up to +10 dB.

– REAR•R +

10 +10

20

Page 21 Page 23
Image 22
Page 21 Page 23
Contents RX-5000VBK For U.S.A Table of Contents Front Panel Remote ControlParts Identification To use the Cursor control buttons q on the front panelChecking the Supplied Accessories Before InstallationConnecting the FM and AM Antennas Getting StartedConnecting the front speakers Connecting the SpeakersBasic connecting procedure Connecting the rear and center speakersAudio component connections Connecting Audio/Video ComponentsConnecting the subwoofer speaker If your audio components have a Compu LINK-3 terminalVideo component connections VCRPlug the power cord into an AC outlet Connecting the Power CordPutting Batteries in the Remote Control + to + and toBasic Operations Turning the Power On and Off StandbyFrom the remote control On the front panelSelecting the Front Speakers Muting the SoundRecording a Source Adjusting the Tone Attenuating the Input SignalAdjusting the Front Speaker Output Balance Reinforcing the BassSetting Center and Rear Speakers for DSP Modes Changing the Source NameUsing the Sleep Timer Storing the Basic Settings Adjustments One Touch OperationPress ONE Touch Operation Receiving Radio Broadcasts Tuning in Stations ManuallyUsing Preset Tuning Press FM or AMSelecting the FM Reception Mode DAP modes Using the DSP Modes3D-PHONIC modes Surround ModesAvailable DSP Modes According to the Speaker Arrangement Speaker arrangements Available DSP modesAdjusting the 3D-PHONIC Modes Adjusting the DAP ModesRear speaker output level Press Rearl / + to adjustPress Surround repeatedly Output balanceActivating the DSP Modes Press Surround repeatedly Until the DSP mode you wantTo cancel the DSP mode Select and play a sound sourceUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModeSame time Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Automatic Source SelectionCassette deck Operating JVC’s Audio/Video ComponentsSound control section Amplifier TunerMD recorder CD player-changerDVD player Troubleshooting Problem Possible Cause SolutionFM tuner IHF SpecificationsAmplifier AM tunerHOW to Locate Your JVC Service Center Limited Warranty AUDIO-2 1299HIMMDWJEIN

RX-5000VBK specifications

The JVC RX-5000VBK is a powerful and versatile audio receiver that offers a rich set of features for both home theater enthusiasts and casual listeners. This unit is designed to deliver excellent sound quality, impressive connectivity options, and user-friendly operation.

One of the standout features of the RX-5000VBK is its ability to deliver high-fidelity audio with clarity and depth, making it an ideal choice for those who value sound quality. With an output of 100 watts per channel, this receiver can drive a variety of speakers, ensuring that users get the best possible performance whether they are enjoying music or watching movies.

The RX-5000VBK integrates advanced surround sound processing capabilities, supporting formats like Dolby Digital and DTS. This processing allows users to experience immersive audio, bringing movies and music to life in a way that's rich and engaging. The unit also includes a built-in equalizer, which allows users to customize their listening experience by adjusting bass and treble settings to their preference.

Connectivity is another strong point of the JVC RX-5000VBK. The receiver comes equipped with multiple HDMI inputs that support 4K video pass-through, enabling users to connect their favorite devices such as Blu-ray players, gaming consoles, and streaming devices without sacrificing video quality. Additionally, there are various analog and digital audio inputs, including optical and coaxial options, making it easy to connect vintage components as well.

The user interface of the RX-5000VBK is designed for simplicity, featuring an intuitive layout that makes it easy to navigate through settings and modes. The included remote control enhances this convenience, allowing users to make adjustments from the comfort of their seating area. Furthermore, the receiver features a built-in AM/FM tuner with programmable presets, enabling users to enjoy their favorite radio stations with ease.

The design of the RX-5000VBK is both stylish and functional, featuring a sleek black finish that can fit well with any home décor. The unit’s compact form factor ensures it can be integrated into various home setups without taking up too much space.

In summary, the JVC RX-5000VBK is a feature-rich audio receiver that excels in delivering high-quality sound, versatile connectivity options, and user-friendly operation. With its combination of advanced technologies and thoughtful design, it stands as an excellent choice for anyone looking to enhance their audio experience at home.
Top Page Image Contents