ProForm PFTL12008.0 user manual

13. Carefully lower the Uprights (81, 83).	13		81
Tighten the two 3/8" x 1 1/2" Patch Bolts (6) and
the two 3/8" x 3 1/2" Patch Bolts (8).				8
Raise the Uprights (81, 83).
	83			6
	6 8
14. Raise the Frame (51) to the position shown.	14
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (55) so that the large		51
barrel and the Latch Knob (54) are in the posi-
tions shown.	13
Remove the tie from the upper end of the			7
Storage Latch (55). Attach the upper end of the
Storage Latch to the bracket on the Frame (51)			55
with a 3/8" x 2" Bolt (7) and a 3/8" Nut (13).	54
Attach the Latch Bracket (95) to the bracket on
the Base (90) with two 3/8" x 2" Bolts (7) and			Large
two 3/8" Nuts (13). Note: It may be necessary to
move the Frame (51) back and forth to align the			Barrel
Latch Bracket with the bracket on the Base.	90
Lower the Frame (51) (see HOW TO LOWER		13	95	7
THE TREADMILL FOR USE on page 21).

15.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread- mill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 23 and 24).

12