THE INFORMATION MODE
The console features an information mode that keeps track of treadmill usage information. The information mode also allows you to select miles or kilometers as the unit of measurement and to turn on and turn off the demo mode.
To select the information mode, hold down the Stop button, insert the key into the console, and then release the Stop button. When the information mode is se- lected, the following information will appear in the dis- play:
The upper left corner of the lower display will show the number of hours that the treadmill has
been operated. The lower right corner of the display will show the total number of miles or kilometers that the walking belt has moved. In addition, an “E” for English miles or an “M” for metric kilometers will appear in the upper right corner of the display. To change the unit of measurement, press the Speed increase button. The lower left corner of the display will show the volume level. To change the volume level, press the Incline in- crease button.
The console fea- tures a display demo mode, de- signed to be used if the tread- mill is displayed
in a store. While the demo mode is turned on, the con- sole will function normally when you plug in the power cord, switch the reset/off circuit breaker to the reset position, and insert the key into the console. However,
when you remove the key, the displays will remain lit, although the buttons will not function. If the demo mode is turned on, a “d” will appear in the upper display while the information mode is selected. To turn on or turn off the demo mode, press the Speed decrease but- ton.
You can select an audio setting if desired. When you use an iFit card, a personal trainer will guide you through your workouts. If a “P” appears in the upper display, the personal trainer will give you detailed in- structions. If no “P” appears, your personal trainer will simply guide you through your iFit workouts. To change the audio setting, press the Incline decrease button.
To exit the information mode, remove the key from the console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs stereo speakers, you must connect your MP3 player, CD player, or other personal audio player to the con- sole through the audio jack.
To use the audio jack, locate the audio wire and plug it into the audio jack. Then, plug the audio wire into a jack on your MP3 player, CD player, or other personal audio player. Make sure that the audio wire is fully inserted.
Next, press the Play button on your MP3 player, CD player, or other personal audio player. Adjust the vol- ume on your personal audio player.
If you are using a personal CD player and the CD skips, set the CD player on the floor or another flat sur- face instead of on the console.
19