ProForm PFTL12008.0 user manual Touch the Base do not fully tighten the Patch Bolts yet

Page 9

6. Attach the Left Upright (81) to the Base (90) with

6

 

 

81

a 3/8" x 3 1/2" Patch Bolt (8), a 3/8" x 1 1/2"

 

 

Patch Bolt (6), and two 3/8" Star Washers (12)

 

90

 

 

in the indicated locations. Partially tighten the

 

 

 

Patch Bolts until the heads of the Patch Bolts

 

 

 

 

touch the Base; do not fully tighten the Patch

8

 

 

 

Bolts yet.

 

 

 

With the help of a second person, tip the tread-

6

12

 

 

mill so that the Base (90) is flat on the floor.

 

 

 

 

90

 

 

7. Orient the Crossbar (82) so that the indicated

7

 

 

 

bump is in the position shown. (Note: The bump

 

3

 

will go into a hole in the Right Upright [83].)

 

 

 

Attach the Crossbar to the Uprights (81, 83) with

 

 

 

82

four 1/4" x 5/8" Bolts (3); do not tighten the

 

 

 

Bolts yet.

 

 

 

3

 

 

 

81

Bump

 

 

 

83

 

 

 

 

8. Identify the Right Handrail (78), which is marked

8

 

 

 

with a sticker. Insert the end of the Wire

 

 

 

Harness (84) into the hole in the bottom of the

 

 

 

 

Right Handrail and out of the hole in the top.

 

 

 

84

 

 

 

 

 

 

 

78

 

 

9

 

 

 

Image 9
Contents Model No. PFTL12008.0 Serial No QUESTIONS?Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT On the WEBTable of Contents Pulse sensor is not a medical device Important PrecautionsPage Before YOU Begin Assembly Make sure that the power cord is unplugged Do not fully fold the Frame yetOvertighten the Nut the Wheels must turn Freely Pinch the Wire Harness 84. Partially tighten Bolts touch the Base do not fully tighten Patch Bolts yetNot fully fold the Frame yet Touch the Base do not fully tighten the Patch Bolts yet Inset drawing. The connectors should slide Ful not to pinch the wiresTogether easily and snap into place. If they do Be careful not to pinch the wires in the Right Handrail Page Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerSelect the manual mode Insert the key into the consoleMeasure your heart rate if desired. Before using Select one of the preset workouts. To select one HOW to USE a Preset WorkoutInsert an iFit card and select a workout HOW to USE AN Ifit WorkoutHOW to USE the Stereo Sound System Information ModeHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useCompatible with GFCI-equipped outlets Top Problem The walking belt slows when walked onProblem Solution Exercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencyKey No. Qty Description Part LIST-Model No. PFTL12008.0Qty Exploded Drawing A-Model No. PFTL12008.0 R1008A Exploded Drawing B-Model No. PFTL12008.0 R1008A Exploded Drawing C-Model No. PFTL12008.0 R1008A Exploded Drawing D-Model No. PFTL12008.0 R1008A Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT