HOW to USE a Preset Workout

1.Insert the key into the console. See step 1 on page 14.

2.Select one of the six preset workouts. To select a preset work-

out, press the Weight Loss Workouts button or the Performance Workouts button repeat- edly; “P 1,” “P 2,” “P 3,”

“P 4,” “P 5,” or “P 6” will appear in the lower left dis- play for a few seconds. The maximum speed set- ting, maximum incline setting, and duration of the workout will also appear in the displays. In addition, a profile of the speed settings of the workout will scroll across the display.

Each workout is divided into one-minute segments. One speed setting and one incline setting are pro- grammed for each segment. Note: The same speed and incline settings may be programmed for consecutive segments.

3.Start the walking belt.

Press the Start button or the Speed increase button to start the workout. A moment after you press the button, the treadmill will automatically adjust to the first speed and incline settings for the workout. Hold the handrails and begin walking.

During the workout, the profile will show your progress. The flashing segment of the profile

represents the current Current Segment segment of the workout.

The height of the flash-

ing segment indicates the speed setting for the cur- rent segment. At the end of each segment, a series of tones will sound and the next segment of the profile will begin to flash. If a different speed or in- cline setting is programmed for the next segment,

the speed or incline setting will flash in the display to alert you and the speed or incline will automati- cally adjust to the speed and incline settings for the next segment.

The workout will continue in this way until the last segment of the profile flashes in the display and the last segment ends. The walking belt will then slow to a stop.

If the speed or incline setting is too high or too low at any time during the workout, you can manually override the setting by pressing the speed or in- cline buttons; however, when the next segment of the workout begins, the treadmill will auto- matically adjust to the speed and incline set- tings for the next segment.

To stop the workout at any time, press the Stop button. To restart the workout, press the Start but- ton or the Speed increase button. The walking belt will begin to move at 1 mph. When the next seg- ment of the workout begins, the treadmill will auto- matically adjust to the speed and incline settings for the next segment.

4. Change the incline of the treadmill as desired. See step 4 on page 14.

5. Follow your progress with the track and the displays.

See step 5 on pages 14 and 15.

6. Measure your heart rate if desired. See step 6 on page 15.

7. Turn on the fan if desired. See step 7 on page 15.

8. When you are finished exercising, remove the key from the console.

See step 8 on page 15.