THE INFORMATION MODE
The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total distance that the walking belt has moved. The information mode also allows you to select miles or kilometers as the unit of measure- ment and to turn on and turn off the demo mode.
To select the information mode, hold down the Stop button while inserting the key into the console, and then release the Stop button. When the information mode is selected, the following information will be displayed:
The priority dis-
play will show the total number of kilometers (or miles) that the walking belt has moved. The
lower right corner of the display will
show the total number of hours that the treadmill has been operated. An “M” for metric kilometers or an “E” for English miles will appear in the lower left corner of the display. Press the Speed increase button to change the unit of measurement if desired.
IMPORTANT: If a
“d” appears in the lower left corner of the display, the console is in the “demo” mode. This mode is in-
tended to be used only when a
treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the indica- tors in the display will automatically appear in a preset sequence; the buttons on the console will not operate. If a “d” appears when the information mode is se- lected, press the Speed decrease button so the “d” disappears.
To exit the information mode, remove the key from the console.
23