ProForm PCTL69100 Assembly requires two people, Extension Leg and thread the Handrail Bolt

Page 6

ASSEMBLY

Assembly requires two people.

Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed.

Assembly requires the included allen wrench

and your own phillips screwdriver

and rubber mallet

.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

1.With the help of a second person, carefully raise the Uprights (82) until the treadmill is in the position shown.

2. Remove the Latch Knob (110) from the Latch Pin (114).

Make sure that the Latch Pin Collar (112) and the Spring

(111)are on the Latch Pin (114) as shown. Insert the Latch Pin into the Storage Latch (77).

Tighten the Latch Knob (110) back onto the Latch Pin (114).

3.See drawing 3a. Press a Handrail Insert (102) into the lower end of a Handrail (85). Hold an Extension Leg

(103)against the lower end of the Handrail. Insert a Handrail Bolt (78) with a Handrail Washer (36) into the

Extension Leg and thread the Handrail Bolt

three or

four turns

into the Handrail. Notice the angle of the

 

Handrail and insert the Handrail Bolt and Washer at the same angle (see drawing 3b).

Attach a Handrail Insert (102) and an Extension Leg (103) to the other Handrail (85) in the same way.

1

 

 

 

 

82

2

 

 

110

 

 

77

 

 

 

111

112

 

 

114

3a

3b

 

85

 

 

102

 

85

103

 

103

36

 

 

36

 

78

 

 

78

 

 

6

Image 6
Contents QUESTIONS? Model No. PCTL69100 Serial NoSerial Number Decal Table of Contents Sion cord Important PrecautionsUse the treadmill only as described Treadmill is capable of high speedsNever insert or drop any object into any opening Using the treadmill Before YOU BeginLeft Side Extension Leg and thread the Handrail Bolt AssemblyAssembly requires two people Four turnsA Base Pad 116 as shown in drawing Slide the upper end of a Handrail 85 and thenDown as shown 101Performant Lube HOW to Plug in the Power CordGrounded before using an adapter Suppressor with your treadmill see drawing 1 at the rightCDs or videocassettes, call toll-free Console DiagramFeatures of the Console See VideoTest the clip by Pulled from the console, adjust the positionSelect the manual mode Carefully taking a few steps backward untilCALS./FAT Cals HOW to USE Personal Trainer Programs HOW to Connect Your Portable CD Player HOW to Connect Your Portable StereoHOW to Connect Your Home Stereo Headphones/SpeakersCable HOW to Connect Your VCRAudio Audio OUT jackConsole To the next settings of the CD or video programStart button or the Speed Follow your progress with the LED track Four displaysHOW to USE Programs Directly from OUR WEB Site Information MODE/DEMO Mode Should be blankButton so the display is blank HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USESolution TroubleshootingProblem The power turns off during use Power cordIf the walking Belt has shifted to the left Problem The walking belt slows when walked onUnplug the Power Cord Whilst the incline is changing, reWorkout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencyKey Qty Description Key No. Qty. DescriptionOrdering Replacement Parts Limited WarrantyPart No R0603A Exploded DRAWING-Model No. PCTL69100 Exploded DRAWING-Model No. PCTL69100