HOW TO USE A PRESET WORKOUT
1.Insert the key into the console.
See HOW TO TURN ON THE POWER on page 15.
2.Select a preset workout.
To select a preset work- out, press the Crosswalk
Workouts button or the Wt. Loss Workouts but-
ton repeatedly until the number of the desired
workout appears in the upper display.
When you select a preset workout, the incline level of the workout will flash in the lower left display, the speed setting will flash in the lower right display, and then the workout length will appear in the lower left display. In addition, a profile of the speed set- tings of the workout will appear in the far left display.
3. Press the Start button or the Speed increase button to start the workout.
A moment after you press the button, the treadmill will automatically adjust to the first speed and in- cline settings of the workout. Hold the handrails and begin walking.
Each workout is divided into 30
During the workout, the profile will show
your progress. The flashing segment of the profile represents the current segment
of the workout. The
height of the flashing segment indicates the speed setting for the current segment. At the end of each segment, a tone will sound and the next segment
of the profile will begin to flash. If a new speed and/or incline setting is programmed for the next segment, the new speed and/or incline setting will appear in the displays. The treadmill will then au- tomatically adjust to the new speed and/or incline setting.
If you have selected a crosswalk workout, you will be prompted to use the crosswalk arms. When the crosswalk indicator on the console lights up, move the crosswalk arms forward and backward as you walk on the treadmill. This action exercises your arms, shoulders, and back for a total body workout.
The workout will continue in this way until the last segment of the profile flashes in the display and the last segment ends. The walking belt will then slow to a stop.
If the speed or incline setting is too high or too low at any time during the workout, you can manually override the setting by pressing the speed or incline buttons; however, when the next segment of the workout begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.
To stop the workout at any time, press the Stop button. To restart the workout, press the Start but- ton. The walking belt will begin to move at 1 mph. When the next segment of the workout begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.
4. Follow your progress with the displays.
See step 5 on page 16.
5.Measure your heart rate if desired.
See step 6 on page 16.
6.When you are finished exercising, remove the key from the console.
See step 7 on page 16.
17