ProForm 320x Problem The walking belt slows when walked on, Come damaged. Remove the key

Page 14

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8.

b.If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be-

come damaged. Remove the key and

UNPLUG THE

POWER CORD

. Using the allen wrench, turn both

rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 2 to 3 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, in- sert the key, and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

2”–3”

Rear Roller Adjustment Bolts

c. If the walking belt still slows when walked on, call our toll-free Customer Service Department.

PROBLEM: The walking belt is off-center or slips when walked on

 

 

SOLUTION:

a. If the walking belt is off-center, first remove the key

 

 

and UNPLUG THE POWER CORD

 

. If the walking

 

 

belt has shifted to the left,

use the allen wrench to

 

 

turn the left rear roller bolt clockwise 1/2 of a turn;

if

 

the walking belt has shifted to the right,

turn the

 

bolt counterclockwise 1/2 of a turn. Be careful not to

 

 

overtighten the walking belt. Plug in the power cord,

 

 

insert the key, and run the treadmill for a few minutes.

 

 

Repeat until the walking belt is centered.

 

 

b. If the walking belt slips when walked on, first remove

the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller bolts clockwise, 1/4 of a turn. When the walking belt is correctly tight- ened, you should be able to lift each side of the walk-

ing belt 2 to 3 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key, and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

a

b

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Model No. DRTL39220 Serial No To Avoid DELAYS, Please Call Direct to OUR TollQUESTIONS? Customer HOT LineTable of Contents Important PrecautionsMove the Treadmill on Never insert any object into any openingRight Side Using the treadmillBefore YOU Begin BackRubber mallet AssemblyMake sure that the power cord is unplugged Page Touch Widest connector on the Wire Harness into the widestConnector on the back of the Console Tor does nThis product must be grounded.If it should malfunc HOW to Plug in the Power CordPerformant Lube Grounded Outlet BoxConsole Diagram STEP-BY-STEP Console OperationFat Calories/Calories Change the incline of the treadmill as desiredFollow your progress with the three displays Time/Distance Speed display -ThisHOW to Fold the Treadmill for Storage HOW to Move the TreadmillHOW to Lower the Treadmill for USE Power Cord TroubleshootingSolution Belt has shifted to the left Problem The walking belt slows when walked onCome damaged. Remove the key Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty Part No R1002BPart Identification Chart Key Qty Description DRAWING-Model R1002B
Top Page Image Contents